21 JAE

[Jerry Muro]

Guys I am up to final rigging and would like to get some input on where everyone is placing their 3rd needle. I am running a NR with a Geraghty preped Black K&B carb. Can some one post some pictures of where you are installing this and how you hooked up the linkage? Thanks Jerry

 

[top fuel 1]

here is how i did mine, i put the 3rd channel on the right i used a 1/4" block with 4-40 blind nuts on the back side .

this also keeps the 3rd needle close to the carb for a faster response time.

 

[tmunn]

I do mine the same as topfuel.it was very tight on the 12 jae so i went out through the side of the hull and used blind nuts on the outside and just cut the bolts so they do not stick out.I will seal the area real well where the blind nuts go.

On the 21 mine will be the same as topfuel's

 

[chuck st romain]

does any one have pictures of the set-up with the NR carb? i am going to use the 3rd chanel but it is not a remote needle, it is on the carb. i want to see how people have trimmed the tub to make it fit.