Search results

If you search Arrow Shark RC Boat Starter on YouTube there are a few videos of past and present designs in operation

I noticed Home Depot had some 1" wide 3" long strips of 3M clear mounting tape with hooks on one side and adhesive tape on the other side that when fastened on each surface using the adhesive, you just press the mating hook sides together, similar to velcro.

Whats the best way to mount a receiver in a radio box; velcro, 2 sided tape, wrap on foam and secure the foam or ???

How long is nitro fuel good for if kept covered in a dark & cool location like in a cellar? I have some partial jugs of heli, boat and Traxxas truck fuel that I was going to dispose of but given the replacement cost I figured I would ask if it has a shelf life.

What is the recommended fuel for the OS .21 outboard? I recall reading somewhere that at least 18% oil is recommended but I have noticed may fuel distributers don't list the oil %.

I even have have a spare out drive.

Thank you

These are the directions that came with it that I followed.

I have a old 57" Ed Barns mono with a G260 PUM and Ballentine HW. I am looking to blow the dust off it this year as its been sitting. I installed a EZ start and if memory is correct I just unscrewed the stock pawl and screwed on the EZ pawl. It sounds like from the above its incorrect. it pulls...

Thanks to all that responded, its much appreciated. While digging around I also found/ remembered my OS .21 outboard, early one with the water cooled head that has never been fired and is in the box+ a Dumas Hot Shot 21 that has the plastic hull and cowl cover that is about 95% completed. I was...

How can I tell if it's a exr? It has the silver head

I have a .67 Picco that I purchased new from Tidewater years ago, its in a red box. I had them install a RPM connecting rod at their shop befor shipping. It has a 3/16 flex cable collet, a polished head and a slight turn down of the flywheel that was to prevent pinching the belt. I installed it...