Really happy with how the hull looks at this point, ive done a good amount of bodywork and modifications in order to give the hull a more scale appearance respective to current day hulls. For starters, I rounded off each sponson tip about 2/3 - 3/4 of an inch and slightly flattened the front surface of them too, also did this to the nose of the cockpit a little as well. I had a 16 inch picklefork depth initially, I then offset each bull nose and shortened the picklefork to about 12 inches overall, and then I subsequently thinned the ram wing a bit too accomodate that change (I hadnt planned that). I feel this probably had the most profound effect towards its appearance and im really happy I went through with it and how it turned out.
