charles siler
Well-Known Member
- Joined
- Oct 29, 2011
- Messages
- 2,004
One of the guys in our club needs a good case thanks Charlie
-
If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
WTB MAC 84 BLOCK
- Thread starter charles siler
- Start date
-
- Tags
- need mac 84 case
Help Support Intlwaters:
charles siler
Well-Known Member
- Joined
- Oct 29, 2011
- Messages
- 2,004
Sorry he needs 3 thanks Charlie
charles siler
Well-Known Member
- Joined
- Oct 29, 2011
- Messages
- 2,004
Broke the tops off both cases internationals are good. There should be enough motors out there with bad pistons that we should be able to find a couple pretty easy.
Thanks Charles
Thanks Charles
Last edited by a moderator:
- Joined
- Feb 23, 2003
- Messages
- 4,200
Good luck, it aint that easy. Lots of cases with popped tops over the years. They have been few and far between. New is unheard of. I would love to have 3 myself.
charles siler
Well-Known Member
- Joined
- Oct 29, 2011
- Messages
- 2,004
Ya Mike I know but it is worth a try.
ALLAN YUEN
Well-Known Member
- Joined
- Jan 14, 2005
- Messages
- 6,427
I had sold my 4x MAC84 engines to USA last 2014 Hardly find engine so go out of phase . Hope you find one Good Luck!
charles siler
Well-Known Member
- Joined
- Oct 29, 2011
- Messages
- 2,004
Just looking to find one or two that have scored pistons to put the good internals that we have already . Thanks Allan
Andy Brown
Well-Known Member
- Joined
- Feb 8, 2003
- Messages
- 2,657
It's tough to find MAC 84 cases. Not many where manufactured. I have a couple that I have saved for myself and they are rejects with casting flaws.
Will Gallagher
Well-Known Member
- Joined
- Nov 29, 2003
- Messages
- 465
I have a pair of supper bad ass 84's that Andy modified for me. I may consider selling, need to think on it a bit.........
charles siler
Well-Known Member
- Joined
- Oct 29, 2011
- Messages
- 2,004
I'm interested let me know thanks will
charles siler
Well-Known Member
- Joined
- Oct 29, 2011
- Messages
- 2,004
Will are they modded the same to run together in a twin. I'll take the anyways how much time on them .
That helps me but not my buddy with the broken block still need 3 use blocks. Thanks Charles
charles siler
Well-Known Member
- Joined
- Oct 29, 2011
- Messages
- 2,004
Ya I thought that also but old or new it still going to give up the ghost sooner or later new style 46DD 2 gallons of fuel.
ALLAN YUEN
Well-Known Member
- Joined
- Jan 14, 2005
- Messages
- 6,427
I can't believe it . Depend on kind of fuel? Percent nitro? Volume oil?
- Joined
- Sep 7, 2011
- Messages
- 2,382
whoa! That's quite a failure. Never seen a case break-out in that manner- almost square plug. Hard to believe the rod, or crank-pin, did'nt break.
Last edited by a moderator:
charles siler
Well-Known Member
- Joined
- Oct 29, 2011
- Messages
- 2,004
David we were testing props and we're just stating the motor and it broke on the stand and died right there so it only heart the block everything else is okay. So much for new hardware lol and it's the same guy that had the tops of the 84s break. Mabe it's just his dumb luck.
Last edited by a moderator:
- Joined
- Jul 9, 2011
- Messages
- 1,792
Charlie try to get a hold of Doug Tweats!! He's on here once a while.
charles siler
Well-Known Member
- Joined
- Oct 29, 2011
- Messages
- 2,004
Still looking for a couple of 84 blocks
henry velasco
Well-Known Member
- Joined
- Jun 2, 2006
- Messages
- 338
If I remember correctly the mac 84 used the 67 case -- the 67,s need to be bored out so if you can get someone to do it it might be easier to find them -- just saying
