Jump to content



Help Support IntlWaters by donating using the link above.
Photo

WTB straight exhaust header for CMB .67HR


  • Please log in to reply
4 replies to this topic

#1 JimZaremski

JimZaremski

    Club Racer

  • Members
  • PipPipPip
  • 671 posts

Posted 21 May 2018 - 11:43 AM

hi, subject says it all- CMB only makes 10 and 18 degree headers, and I need a straight one. 

 

Thanks





#2 FloridaScaleBoater

FloridaScaleBoater

    World Racer

  • Members
  • PipPipPipPipPip
  • 5,663 posts

Posted 21 May 2018 - 12:38 PM

hi, subject says it all- CMB only makes 10 and 18 degree headers, and I need a straight one. 

 

Thanks

 

Jim,

I don't think you will find a 0* header

But Bill Brandt of Rattlesnake R/C carries a Jensen 5* S/S that works great for the "In The Tub" exhaust

 

Won't let me copy & paste at work,,, just type in Rattle Snake RC
 

In the search put in Gary Jensen




Edited by FloridaScaleBoater, 21 May 2018 - 12:39 PM.


#3 Ray Sametz

Ray Sametz

    World Racer

  • Members
  • PipPipPipPipPip
  • 6,588 posts

Posted 21 May 2018 - 12:55 PM

hi, subject says it all- CMB only makes 10 and 18 degree headers, and I need a straight one. 

 

Thanks

I assume it's for a scale to get pipe under deck. I had to take a 10* header, cut it at 10 degrees rotate the end and have it welded by Tom Foley. Hope this helps.



#4 Mikemalloy

Mikemalloy

    Beginner Boater

  • Members
  • Pip
  • 78 posts

Posted 21 May 2018 - 01:02 PM

Jim here is the link for the header on Rattlesnake R/C site @ allrc1.com                                                                                     

 

 https://www.allrc1.c...-80-header-assy



#5 Bill Brandt

Bill Brandt

    World Racer

  • Members
  • PipPipPipPipPip
  • 1,742 posts

Posted 21 May 2018 - 05:22 PM

The header Mike lists is 5 degrees to the side so you can rotate left or right for a through transom exit.