• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Performance Unlimited Raptor Cat

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Jim Allen

Well-Known Member
Joined
Jun 7, 2005
Messages
1,622
This vacuum infusion process molded 6 lb carbon fiber cat is 17" wide X 48" long. It has a 9 & 3/4" wide X approximately 2" deep tunnel. It comes painted & is finished in high gloss clear paint. The hull comes with a carbon fiber radio box & blue printed bottom running surfaces, The engine mounting rails are also carbon fiber. Notice that this hull is a clam shell type, not the typical shoe box type. A drop down engine mounting system allows for a very low CG & a much reduced shaft tube angle. The $960.00 price includes shipping inside the USA, the radio box & paint. In my opinion this boat is a spectacular piece of work that is well worth the investment!!

Jim Allen

IMG_1937.JPG

IMG_1939.JPG

IMG_1940.JPG

RaptorCatc.jpg
 
Last edited by a moderator:
Hi Jim,

Why are water pick-ups on bottom of boat? Can't see rudder on that picture.

Thank You,

Bill
 
Be wary of them style of pickups in the hull.If you can see the inlet holes when looking directly over it, those tend not to pickup water very well.
 
Back
Top