NEWS!!!!!!! NOVAROSSI direct drive 46 motor.......

[aaron alberico]

Novarossi 46 direct drive motor will be available April,

same motor as wrap around version, with oppersite rotation crank

and P.T.O(like and outboard motor)

These will be more expensive then the wrap around version.

regards Aaron

 

[Luca Gray]

Aaron

WOW.......

just keeps getting better and better :wub:

cheers Luca

 

[Norm Doerr]

You got my attention now! YES!

 

[Richard Dahlheimer]

Wow! that didnt take long. Very nice. What carb are you running, Aaron? Thanks, Richard

 

[Niklas Edlund]

Sweet, now we're waiting for the .21 version also...

 

[ALLAN YUEN]

Arron can you show open crankshaft and bullet rear housing w/bearings thanks

 

[Geraghty]

Novarossi 46 direct drive motor will be available April,

same motor as wrap around version, with oppersite rotation crank

and P.T.O(like and outboard motor)

These will be more expensive then the wrap around version.

regards Aaron

Aaron,

How long have you had this prototype??????????

I assume you have run it......

Rod Geraghty

 

[David Bryant]

yes, I would love to see internal images of new crankshaft assembly, etc.,...

 

[aaron alberico]

Novarossi 46 direct drive motor will be available April,

same motor as wrap around version, with oppersite rotation crank

and P.T.O(like and outboard motor)

These will be more expensive then the wrap around version.

regards Aaron

Aaron,

How long have you had this prototype??????????

I assume you have run it......

Rod Geraghty

Rod

Yes i have...

 

[dave roach]

Now the cat is out of the bag,How about some picture of the piston-sleeve crank assy.

Dave Roach

 

[aaron alberico]

It is the same motor just with oppersite rotation crankshaft and different backplate.., backplate has 2x Bearings and another small crankshaft like an outboard motor...

 

[ALLAN YUEN]

It is the same motor just with oppersite rotation crankshaft and different backplate.., backplate has 2x Bearings and another small crankshaft like an outboard motor...

Do not show any picture inside <_<

 

[aaron alberico]

Picture

 

[Glenn Quarles]

Friends, if you bought one of the original 46 motors and would like to change it to this rear exhaust, conversion kits will be available.

Glenn

 

[Geraghty]

How long have you had this prototype??????????

aaron alberico, on 01 March 2012 - 03:39 PM, said:

Rod

Awhile.... Why?

Let me tell you a story......"turn-around" motors like the new Novarossi .46 you debuted from Novarossi,have been coming out of

David Halls secret Smithy room for the past 16 years that I know of........

About 5 years ago David made a turnaround .12 motor [exactly like the new Novarossi .46 you have] and sent it to Glenn Quarles......

Glenn sent that motor to Novarossi for them to look at...We thought this would be a great way for Novarossi to get a rear exhaust motor with very little cost.

We never heard back any comments,good or bad, from Novarossi about that turnaround motor sent to them....That motor is still in Italy...............

You can imagine my surprise today when I saw the photos you posted on IW of the new motor.......

First of all,we ain't bitchen....we are very happy Novarossi has chose to throw their hat in the ring and introduce new marine motors for the RC

boating community........This motor is a great addition to the Novarossi line of motors.....

I just wanted to go on record saying ,this motor design came from the old U.S. of A........not Italy........right out of the shop of David "sparky" Hall......

I just want the credit for this motor design to land where it should.......with David .... B)

If I am wrong about this Nova can come on IW and explain how they got this idea and maybe I will apologize [but I doubt it]....LOLOLOL.....

 

[ALLAN YUEN]

It is the same motor just with oppersite rotation crankshaft and different backplate.., backplate has 2x Bearings and another small crankshaft like an outboard motor...

Aaron One more question which one use Creamic bearings or standard metal bearings for backplate? thanks

 

[Glenn Quarles]

How long have you had this prototype??????????

aaron alberico, on 01 March 2012 - 03:39 PM, said:

Rod

Awhile.... Why?

Let me tell you a story......"turn-around" motors like the new Novarossi .46 you debuted from Novarossi,have been coming out of

David Halls secret Smithy room for the past 16 years that I know of........

About 5 years ago David made a turnaround .12 motor [exactly like the new Novarossi .46 you have] and sent it to Glenn Quarles......

Glenn sent that motor to Novarossi for them to look at...We thought this would be a great way for Novarossi to get a rear exhaust motor with very little cost.

We never heard back any comments,good or bad, from Novarossi about that turnaround motor sent to them....That motor is still in Italy...............

You can imagine my surprise today when I saw the photos you posted on IW of the new motor.......

First of all,we ain't bitchen....we are very happy Novarossi has chose to throw their hat in the ring and introduce new marine motors for the RC

boating community........This motor is a great addition to the Novarossi line of motors.....

I just wanted to go on record saying ,this motor design came from the old U.S. of A........not Italy........right out of the shop of David "sparky" Hall......

I just want the credit for this motor design to land where it should.......with David .... B)

If I am wrong about this Nova can come on IW and explain how they got this idea and maybe I will apologize [but I doubt it]....LOLOLOL.....

Yep Rod is right on...this looks just like the big brother version of the .12 that Dave built for me years ago. I think it is also like the turn around motors that Martin is making.

I am very excited about the option of have two different .46 Nova motors to choose from!

GQ

 

[Ian Inverarity]

How long have you had this prototype??????????

aaron alberico, on 01 March 2012 - 03:39 PM, said:

Rod

Awhile.... Why?

Let me tell you a story......"turn-around" motors like the new Novarossi .46 you debuted from Novarossi,have been coming out of

David Halls secret Smithy room for the past 16 years that I know of........

About 5 years ago David made a turnaround .12 motor [exactly like the new Novarossi .46 you have] and sent it to Glenn Quarles......

Glenn sent that motor to Novarossi for them to look at...We thought this would be a great way for Novarossi to get a rear exhaust motor with very little cost.

We never heard back any comments,good or bad, from Novarossi about that turnaround motor sent to them....That motor is still in Italy...............

You can imagine my surprise today when I saw the photos you posted on IW of the new motor.......

First of all,we ain't bitchen....we are very happy Novarossi has chose to throw their hat in the ring and introduce new marine motors for the RC

boating community........This motor is a great addition to the Novarossi line of motors.....

I just wanted to go on record saying ,this motor design came from the old U.S. of A........not Italy........right out of the shop of David "sparky" Hall......

I just want the credit for this motor design to land where it should.......with David .... B)

If I am wrong about this Nova can come on IW and explain how they got this idea and maybe I will apologize [but I doubt it]....LOLOLOL.....

If that is the case, congratulations David Hall! B)

 

[aaron alberico]

It is the same motor just with oppersite rotation crankshaft and different backplate.., backplate has 2x Bearings and another small crankshaft like an outboard motor...

Aaron One more question which one use Creamic bearings or standard metal bearings for backplate? thanks

Allan

The one's i have got steel bearings in the backplate..

 

[ALLAN YUEN]

It is the same motor just with oppersite rotation crankshaft and different backplate.., backplate has 2x Bearings and another small crankshaft like an outboard motor...

Aaron One more question which one use Creamic bearings or standard metal bearings for backplate? thanks

Allan

The one's i have got steel bearings in the backplate..

I wonder that can change to put new creamic bearings kit in future? thanks