• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Parts For Sale Sport 40 Project

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

happybradboating

Well-Known Member
Joined
Jul 3, 2007
Messages
1,083
This boat was purchased from a local boater and has some issues. In picture #10 the back side of the transom does not sit flat on my setup board. It could be a nitro or FE boat.

The total price is $300.00 for the boat & running hardware plus shipping cost.

***The first to say "I will take it" gets first shot to purchase the boat then second in line etc.

If paying by Paypal do as ff or fees. I accept USPS M.O. for payment. Please only respond to this post, no PM unless payment arrangements and shipping location is needed.
 

Attachments

  • 284278737_403168908398329_2595467482833680327_n.jpg
    284278737_403168908398329_2595467482833680327_n.jpg
    308.6 KB · Views: 0
  • 283831155_520010016386408_3954603130578254923_n.jpg
    283831155_520010016386408_3954603130578254923_n.jpg
    257.1 KB · Views: 0
  • 281886968_1166171280840114_6596291976202281066_n.jpg
    281886968_1166171280840114_6596291976202281066_n.jpg
    248.4 KB · Views: 0
  • 283295798_404856288180534_8735675397994488510_n.jpg
    283295798_404856288180534_8735675397994488510_n.jpg
    244.6 KB · Views: 0
  • 280961458_318334913814364_3235908637578005445_n.jpg
    280961458_318334913814364_3235908637578005445_n.jpg
    298 KB · Views: 0
  • 20220527_212912.jpg
    20220527_212912.jpg
    3.6 MB · Views: 1
  • 20220527_213255.jpg
    20220527_213255.jpg
    3.9 MB · Views: 1
  • 20220527_213312.jpg
    20220527_213312.jpg
    1.3 MB · Views: 0
  • 20220527_214045.jpg
    20220527_214045.jpg
    3.3 MB · Views: 1
  • IMG_20220529_112230975.jpg
    IMG_20220529_112230975.jpg
    1.5 MB · Views: 1
does the sponsons sit flat on the setup board but the transom doesn't? and has the boat been totally sealed yet?
 
That can be fixed, peel the skin off, get it on a jig or flat table and re-skin it with weight on it, then your off to the races with a true and square hull! Might need to encourage someone to take on the overhaul challenge but it’s doable.!
 
That can be fixed, peel the skin off, get it on a jig or flat table and re-skin it with weight on it, then your off to the races with a true and square hull! Might need to encourage someone to take on the overhaul challenge but it’s doable.!
Hi Greg, I was told the same by another boater. It is not my interest to rebuild the hull but might be a job someone wants to tackle?!
 
Make me an offer on this boat below $200.00, the hardware alone would cost $80.00 or more. Then shipping cost.
Thanks,
Brad
 
Make me an offer on this boat below $200.00, the hardware alone would cost $80.00 or more. Then shipping cost.
Thanks,
Brad
I could see getting what you are asking price if the boat wasn’t messed up and needing rework. But with it needing rework. I think your going be hard time trying to get $300+ shipping for it.
 
I could see getting what you are asking price if the boat wasn’t messed up and needing rework. But with it needing rework. I think your going be hard time trying to get $300+ shipping for it.
Hi Eric, Please read the post, I dropped the price a while back to $200.00. At this point I am opening it up to anyone willing to make me an offer. In summary, less than $200.00.
Thank you,
Brad
 
Back
Top