Sport 40 hardware

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Mike Engelhardt

Well-Known Member
Joined
Jun 2, 2019
Messages
83
Can anyone give me the correct hardware list for a ml boatworks sport 40? Rudder, strut, turn fin.. thanks in advance
 
Strut 21 Sport Hydro Flat
Speedmaster SPDS-005-F

Rudder 21 Blade
SPDRS-007-21SNGT

The rudder length works well when you mount the strut off the back

Turn Fins is neither going to be Tyndal or a new Design Mojo fin. Get the thick version. Those are the only 2 I know of.
 
That’s what I used on mine. Speedmaster changed there rudder design on the 21 rudder and suggested what I told you. Worked great. I do believe it’s the same hardware Phil suggests on his boats. Mount your strut on the rear.

I also suggested the T Bracket for your rudder in case you wanted to change sides. If not change the last letter of the rudder to a “A” and it’ll be just one side.
 
Strut 21 Sport Hydro Flat
Speedmaster SPDS-005-F

Rudder 21 Blade
SPDRS-007-21SNGT

The rudder length works well when you mount the strut off the back

Turn Fins is neither going to be Tyndal or a new Design Mojo fin. Get the thick version. Those are the only 2 I know of.

Mike Hughes, MH Hardware makes turn fins. Mike is a IW member.
JD
 
I used a Lenny Blake rudder ( I think) and Speedmaster strut. Just be wary of the 3-1/2" rule to drive dog. The decal tells you who's turn fin I used. ;)
 

Attachments

  • CIMG0877.jpg
    CIMG0877.jpg
    1.7 MB · Views: 63
Back
Top