• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Shovelnose hydro hull/hardware

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

toyotatruckin

Well-Known Member
Joined
Jun 5, 2006
Messages
1,068
Been collecting dust for a few years but never run never drilled stringers arnt in the hull yet -- set it up for electric or nitro-- length 26.75" width is 12.5" (furthest points) good hull for RTR powertrain transplant-- cowl is yellow hull is black not paint just as it came out of a mold (no name hull) what you see is what you get (rudder blades brackets zuber nuts flex shaft stub shaft drive dog 2 bushings 2 struts (one set of brackets) 1 strut blades had the gap opened up a little for more adjustment

$125 shipped lower 48 paypal only PM if you have any questions thanks!----SOLD
RCB3.jpg RCB4.jpg RCB2.jpg RCB1.jpg
 
Last edited:
Back
Top