Seaducer 20 mono

Help Support intlwaters.com:

FloridaScaleBoater

Well-Known Member
Joined
Oct 2, 2005
Messages
6,311
It did run in district 3 but Jerry Crowther ran it.
Hey Curtis old friend! Been way too long, how have you and the family been?
Looks like a good deal here, is this the hull Jeremy Edge had for awhile?
I see the black/silver flake on the radio box. Didn't Jeremy have one in that color?
 

curtis canton

Well-Known Member
Joined
Jan 27, 2009
Messages
185
Hey sir. All is well and family is doing well. Boys are all big men now. Yes this is the same boat. Radio box is black and silver flaked. Not sure if Jeremy ran it but Jerry did say he ran it and did some work to the bottom.
 

Jerry_Crowther

Well-Known Member
Joined
Apr 26, 2004
Messages
309
That was my old boat It has to be at least 15 years old in not older. I raced it for awhile then sold it to Mike He had if for a few years and I re did the radio box for him. Then I heard Curtis got most of Mike's stuff to sell it off. That's all I know.
 

Carl Van Houten

Well-Known Member
Supporting Member
Vendor
Joined
Mar 6, 2011
Messages
1,245
Okay THANKS! We are messing around with an outboard mono. I am going to order one and give it a try. We are not too far off but have not tried that prop. Mag had said that also.

Thanks
-Carl
 

Jerry_Crowther

Well-Known Member
Joined
Apr 26, 2004
Messages
309
Okay THANKS! We are messing around with an outboard mono. I am going to order one and give it a try. We are not too far off but have not tried that prop. Mag had said that also.

Thanks
-Carl
I built a OB mono and raced it at the 2000 Nat's in LA. I smashed the 6 lap oval record with it. Boat ran very well. I used a X 440 3 blade that I modded pretty good. I might still have the prop. Sold the boat at the nat's to a guy that only ran OB monos. I forget his name.
 

MikeMischnick

Well-Known Member
Supporting Member
Joined
Jul 24, 2018
Messages
247
Kevin you're going to enjoy that boat. Set up properly it will run in the 50 mph range and absolutely go where you point it. I've been racing seaducer boats since I came back in the hobby. Enjoy the experience.
 

Kevin Burns

Well-Known Member
Supporting Member
Joined
Jun 15, 2014
Messages
100
I'm no sir, I'm from Chicago :) No worries man I trust ya. thanks. I come from the BMX world, our frames have 3 inch diameter Chromoly tubes (thin wall) so the frames get dented a lot. When our bikes get dented we pump high pressure air into the tubes weep holes, and the dents pop out (Most of the time). I'm going to give that pipe a try and see if it will work the same. LOL Worst that can happen is the pipe splits.
Anyways thanks.
 
Top