Scratch building rigger

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Tested motor today greased shaft filled tank wouldn’t run swapped carb fired right up bought a gizmo shaft prop came loose must be metric thread they show in picture shaft with nut but doesn’t come with one so I will have to go to hardware store to buy one other then that should be good I sharpen and balanced the prop worked on the turn fin some more home made .
 
Tested motor today greased shaft filled tank wouldn’t run swapped carb fired right up bought a gizmo shaft prop came loose must be metric thread they show in picture shaft with nut but doesn’t come with one so I will have to go to hardware store to buy one other then that should be good I sharpen and balanced the prop worked on the turn fin some more home made .
6mm nut on that gizmo shaft.
 
Rayee found a old picture
 

Attachments

  • DB452802-6704-4F36-B054-DE84F1C829A6.jpeg
    DB452802-6704-4F36-B054-DE84F1C829A6.jpeg
    248.3 KB · Views: 0
  • 62C80386-1BC8-4305-A3C2-70BB61FAE2B9.jpeg
    62C80386-1BC8-4305-A3C2-70BB61FAE2B9.jpeg
    35.3 KB · Views: 0
Back
Top