Radio setup for 3rd channel

[jeffaustin]

Have a Futaba 4PK-2:4G Super -R transmitter,
Want to use the DT3 control for 3rd channel,I have manual but can’t figure this out…. Thanks for any help

 

[Daniel's Racing]

Go to switches and dials and assign DT3 to channel 3

The 4PK has dials by themselves. Dial>DT3 set to Ch3 set your step amount and then forward or reverse.

You can also change the number of clicks available or the amount of motion you get from each click. Also forward and reverse direction of the channel is set in there also.

Page 87 and 88

Function Select Dial

FUTABA 4PK-2.4GHZ Manual Online: Function Select Dial ''Dial. This function allows selection of the function performed by the digital dial (DL1/DL2/ DL3) and digital trimmers (DT1/DT2/DT3), step amount adjustment, and operating di- rection reversal. - The table below lists the functions...

www.manualslib.com

 

[jeffaustin]

Thanks Daniel,you have helped me a ton, thanks again

 

[Mike Hughes]

Awesome radio. It is what I use. Own 3. Only use one. The other 2 are back ups.