Picco 65 gasket

[Ken Webb]

I need 2 Piccp 65 crankcase gaskets. Anybody know of any?

 

[nitro freak]

if the p-67 will work,I can send you some

Henry

 

[Mike Hughes]

If they dont work, you can always cut your own. Just use a brown paper bag from the grocery store. Works great. I keep a piece in my tool box at all times just incase I rip one.

Mike

 

[Ken Webb]

I think the 65 and 67 cases are the same. Thanks for the offer of gaskets. I think I'll try to make my own. If that doesn't work I'll grt in touch. My engine is all gunked up from being stored for years. Gaskets stuck and tore. Any suggestions on cleaning the gunk out. I thinl it's old wd40. Stuff isn;t meant for long term storage.

 

[Joe Wiebelhaus]

Use some carb or brake cleaner, when apart, soak in lacquer thinner, green scotch brite pads (with liquid soap) work well cleaning the machined surfaces like new.

I would replace the bearings while apart.

Also, OPS 67 gaskets would work for the crankcase.