Paint Rotisserie or ??

Intlwaters

Help Support Intlwaters:

Tony Jacuzzi

Well-Known Member
Joined
Jun 26, 2002
Messages
1,775
I seem to recall that someone built a rotisserie style boat stand for painting hulls. I am just about ready to start shooting color on a 1/6 scale monster and I am trying to figure out the best way to set the hull up for painting. Top and bottom will have the same color. Was actually thinking about doing the top and bottom on 2 different days with the hull set out flat, but that would entail a lot of masking and trying to avoid overspray. Appreciate any suggestions tony J
 

Roxyflash

Well-Known Member
Joined
Aug 20, 2003
Messages
1,044
Could make one out of a cheap boat winch trim the bracket on the other side of gear drive so you could bolt a L bracket to get like 350 degree rotation out of it bolt the winch to a tall saw horse then use a bearing block on another saw horse to support other end.You could get a larger boat winch and make the bracket heavy duty to support the hull from one end would have to mount it to some thing heavy.
 

Joe Wiebelhaus

Well-Known Member
Supporting Member
Joined
Apr 1, 2005
Messages
1,815
2K primer coat and white base coats, single spray, top & bottom, hangers, hooked to a chain from the ceiling, rotate, top, bottom, all around, its work for me for 40 years, 60 plus boats.
 

Attachments

  • Scale 001.jpg
    Scale 001.jpg
    352.4 KB · Views: 0
  • Scale 002.jpg
    Scale 002.jpg
    353.3 KB · Views: 0
  • Scale 007.jpg
    Scale 007.jpg
    376 KB · Views: 0
  • Scale 024.jpg
    Scale 024.jpg
    375.1 KB · Views: 0
  • Scale 025.jpg
    Scale 025.jpg
    362.6 KB · Views: 0

dr gary turner

Well-Known Member
Joined
Dec 25, 2004
Messages
2,581
My rotisserie.
I have done 21 hydros to twin hydro tubs

Worked today
 

Attachments

  • ABF36BA4-BF16-4CC4-98FA-597A7D5998FA.jpeg
    ABF36BA4-BF16-4CC4-98FA-597A7D5998FA.jpeg
    2.9 MB · Views: 0
  • E89E554E-94FF-4649-8820-B7544EAD2F23.jpeg
    E89E554E-94FF-4649-8820-B7544EAD2F23.jpeg
    3.3 MB · Views: 0
  • 76305EFF-9C28-4A44-B79A-2C73C5BB5F6A.jpeg
    76305EFF-9C28-4A44-B79A-2C73C5BB5F6A.jpeg
    1.7 MB · Views: 0
  • 0B08BD5E-7A24-4D67-807A-5F393158C3B7.jpeg
    0B08BD5E-7A24-4D67-807A-5F393158C3B7.jpeg
    2.6 MB · Views: 0
  • 9DAAB0A4-EBAF-42BC-B385-CA71F363875A.jpeg
    9DAAB0A4-EBAF-42BC-B385-CA71F363875A.jpeg
    2.8 MB · Views: 0

Brian Spitzer

Well-Known Member
Joined
May 18, 2008
Messages
338
Rotisserie all the way, well worth the time investment. I’ve attached some photos of my setup.
 

Attachments

  • BC562202-0035-4B56-8C00-63F32A3BF3A7.jpeg
    BC562202-0035-4B56-8C00-63F32A3BF3A7.jpeg
    634.2 KB · Views: 0
  • B41D4A45-1B5B-4FA2-B8B9-12F253C42F86.jpeg
    B41D4A45-1B5B-4FA2-B8B9-12F253C42F86.jpeg
    571.4 KB · Views: 0
  • 44199F73-81E1-448C-9D9B-0CEEC903C172.jpeg
    44199F73-81E1-448C-9D9B-0CEEC903C172.jpeg
    578.1 KB · Views: 0
  • 88916F5F-0337-4A65-91C4-FCDA280CD6EE.jpeg
    88916F5F-0337-4A65-91C4-FCDA280CD6EE.jpeg
    551.8 KB · Views: 0
  • 575C1769-2B21-4FE8-BC4E-E302CEDB55A9.jpeg
    575C1769-2B21-4FE8-BC4E-E302CEDB55A9.jpeg
    564.2 KB · Views: 0
  • 821052C3-5DE4-40E7-902D-C47649DBA883.jpeg
    821052C3-5DE4-40E7-902D-C47649DBA883.jpeg
    604.2 KB · Views: 0
  • 9A6FFB52-B044-4118-8AFF-15664BBD6FC7.jpeg
    9A6FFB52-B044-4118-8AFF-15664BBD6FC7.jpeg
    623.4 KB · Views: 0
Top