Page 2 of new listing

Intlwaters

Help Support Intlwaters:

Yves Laberge

Well-Known Member
Joined
Nov 22, 2004
Messages
69
Hello M. Barney, if you ship to Canada, i would like to buy one 1819-19-38 and one 1819-17-45, if advailable please give me the price for the props and shipping to G0R 2C0 in usd.
Thanks!
 

Walt Barney

Well-Known Member
Vendor
Joined
Dec 3, 2003
Messages
3,196
Hello M. Barney, if you ship to Canada, i would like to buy one 1819-19-38 and one 1819-17-45, if advailable please give me the price for the props and shipping to G0R 2C0 in usd.
Thanks!
I will look in my inventory and see if I have both props.
Thanks
Walt Barney
 

Walt Barney

Well-Known Member
Vendor
Joined
Dec 3, 2003
Messages
3,196
I will look in my inventory and see if I have both props.
Thanks
Walt Barney
M. Barney, what will be the cost for a tank like this? View attachment 282228
This tank will hold 13.1 oz of fuel, BUT i cannot put the pick up fuel in the left lower as the header tank sit there on the inside,What kind of boat is this fore?? You also do no show where you want the pressure tube.
Thanks
Walt Barney
 

Yves Laberge

Well-Known Member
Joined
Nov 22, 2004
Messages
69
This tank will hold 13.1 oz of fuel, BUT i cannot put the pick up fuel in the left lower as the header tank sit there on the inside,What kind of boat is this fore?? You also do no show where you want the pressure tube.
Thanks
Walt Barney
Ok the tank is for a sport 40 and the pressure tube must be in the top right corner, and the pick-up tube on the best place you think! Can i use a small 1 oz tank close to the carb? your header tank i think is for the same purpose?

Thanks, Yves.
 

Walt Barney

Well-Known Member
Vendor
Joined
Dec 3, 2003
Messages
3,196
Ok the tank is for a sport 40 and the pressure tube must be in the top right corner, and the pick-up tube on the best place you think! Can i use a small 1 oz tank close to the carb? your header tank i think is for the same purpose?

Thanks, Yves.
 

Walt Barney

Well-Known Member
Vendor
Joined
Dec 3, 2003
Messages
3,196
Is there any way to make this tank bigger either width, length, or height I don't think you are going to have enough fuel to finish a race unless you can start about 1 min. before the race starts. Also if your needle is just a little on the rich side you still might not finish the race.
With the header tank on the inside of the main tank you should not need a 1 oz tank, I can put the pickup tube coming out of the main tank any place you want it except the left lower corner as ths is were the pick up tube for the header tank you can put it at the top and the pressure at the top of the tank on the right, the normal positions are the pressure on the left top and the pick up tube on the top right, you do not have to worry about getting enough fuel to the carb. because of the way I build fuel tanks.
I do have both of the props that you want I can send them with the fuel tank.
Thanks
Walt Barney
 

Yves Laberge

Well-Known Member
Joined
Nov 22, 2004
Messages
69
Is there any way to make this tank bigger either width, length, or height I don't think you are going to have enough fuel to finish a race unless you can start about 1 min. before the race starts. Also if your needle is just a little on the rich side you still might not finish the race.
With the header tank on the inside of the main tank you should not need a 1 oz tank, I can put the pickup tube coming out of the main tank any place you want it except the left lower corner as ths is were the pick up tube for the header tank you can put it at the top and the pressure at the top of the tank on the right, the normal positions are the pressure on the left top and the pick up tube on the top right, you do not have to worry about getting enough fuel to the carb. because of the way I build fuel tanks.
I do have both of the props that you want I can send them with the fuel tank.
Thanks
Walt Barney
Thanks M. Barney, it is ok for me for the tank with both tube as you said, go ahead with the tank and props.

Yves.
 

Walt Barney

Well-Known Member
Vendor
Joined
Dec 3, 2003
Messages
3,196
Thanks M. Barney, it is ok for me for the tank with both tube as you said, go ahead with the tank and props.

Yves.
OK on the tank and props I should get this tank completed in 10 to 14 days. I will need your complete address.
thanks
Walt Barney
Tanks 2 U
Walt's Hobbies
 

charles siler

Moderator
Staff member
Moderator
Joined
Oct 29, 2011
Messages
2,004
3 1815-19-38
2 1817-19-38
4 1819-19-38
4 1821-19-38
2 1814-17-45
5 1815-17-45
4 1616-17-45
5 1817-17-45
5 1819-17-45
2 1814-10-50
2 1816-10-50/3CCL
1 1816-10-50/3CLR
6 1915-19-38
3 1917-19-38
1 1919-19-38
2 1915-17-45
1 1916-17-45
2 1917-17-45
1 1916-10-50
1 2017-19-38
5 2014-17-45
2 2015-17-45
2 2016-17-45
2 2016-10-50/3CLL
1 2016-10-50/3CLR
1 2018-10-50
2 2018-10-50/3CLL
2 2018-10-50/3CLR
3 2115-19-38
1 2117-19-38
4 2116-17-45
2 2116-15-60/3
1 2215-19-38
3 2217-19-38 1 sold to Mark
5 2219-19-38 1 sold to Mark
2 2221-19-38
1 2215-17-45
3 2214-10-50
1 2214-15-60/3CLR
Please use this thread to post for the above props, Thanks

Walt I’ll take (2) 2221s and (2) 2219s thanks Charlie
 

Latest posts

Top