Ops .67

[Austin Hayes]

Hello, I’ve recently got into nitro boats and am building a skiff with a .67 ops engine, does anyone have recommendations on a good carb? Also where could I find other parts such as motor mounts, pistons and glowplugs for this engine?

 

[SayMikey]

A search of the manufacturer page will nett plugs and bearings. The rest will be found by asking on the forsale page

 

[Tom Foley]

The stock carb works just fine . Ran them for many years . Run 20 % oil if possible the rods don't like lean . Bearings are cheap . Lubricate well after running and behind the flywheel as well to flush out moisture trapped in there . Rossi R6 plugs , OPS black , K& B , O' donnel 289 or 99 all work .

 

[brad nichols]

Best rod were the RPM's, but they are no longer made. I believe there were some steel ones made also that are good. Got Nitro carried the line for awhile but he passed then Andy Brown had them for awhile. You may try Mantua out of the UK. Take care of the after run service and they will last a long time.