Discussion in 'Outboard Forum' started by normlee, May 26, 2019.
Any suggestions to what mount to use with OS drive please.
OS drive comes with a great mount. TB
Good looking boat....any build pics....
OS Mount is perfect
I've built a few of those boats!
Try a 42x53 Lynx cut. 1/8" above and flat.
Welcomed Norm. Also, the bolt pattern that is etched/burned on the transom is for the OS mount/lower. Boat was designed to use the OS motor. Not certain what would need to be done to run a K&B. Haven't tried myself as I'm moving away from K&B.
I have an OS drive and Novarossi keep 21 for it. What prop brand is the 42x53 please?
FYI - the NX-300 was designed the stock OS while the NX-320 is designed more for mod motors. Good luck!
Mark probably means a 40x53 (2 blade) abc or grimracer
I was wondering if I had stated the correct prop. Kris is correct, 40x53.
That looks like an older kit.
If it is an older kit you would have triangle shaped stumble blocks (flat on the top)
May I suggest trying our new stumble blocks. They really improve the way the boat
Be glad to send you a new set at no charge, if you are interested send me your address
Separate names with a comma.