Christian Lucas
Well-Known Member
- Joined
- Aug 23, 2012
- Messages
- 339
Hi,
start yesterday to build a low prifile outbordmotor for a small 24 inch long tunnelhull ( the boat i will show after the motor) .
Motor is a high rev outrunner with direct airinlet and fan on the top side. As the motor is angeled to the front fresh cooling air will flow over the midelsection of the canopy , you will see. 3,2 mm flexcable and 4 mm propshaft. Main parts are carbon plate and rectangular tube . The propshaft hat ballbearing and is secured so cannot lose if the fex breaks ,like K&B does.
All cutting i do free hand with a Dremel and a diamond cutting disc with different dia.
Happy Amps Christian
start yesterday to build a low prifile outbordmotor for a small 24 inch long tunnelhull ( the boat i will show after the motor) .
Motor is a high rev outrunner with direct airinlet and fan on the top side. As the motor is angeled to the front fresh cooling air will flow over the midelsection of the canopy , you will see. 3,2 mm flexcable and 4 mm propshaft. Main parts are carbon plate and rectangular tube . The propshaft hat ballbearing and is secured so cannot lose if the fex breaks ,like K&B does.
All cutting i do free hand with a Dremel and a diamond cutting disc with different dia.
Happy Amps Christian