Nemo 2 BZM 30.5

[Jarema Malek]

Hello.First time painting .Some spots not 100% but happy enough with result.Spraymax 2K in cans used

 

[Oleg Baturin (UKR-167)]

Hi .Why you want v angle?You want to copy hull?

No, I just want to confirm my arguments for discussion with one of my friends who is working on his own design of the FSR-O hull.

 

[Oleg Baturin (UKR-167)]

. Was made especialy for Ronny.Contact Ronny Riedel (Ri Ro Racing)on facebook for pricing ( Log into Facebook ) I got hull from Him.He is in Germany.He is TJ Models dealer.It took week to get it as Ronny had it for himself but decided to sell to me as there was no races cause covid.ps Hull cost more than on TJ models page but cheaper shipping from germany than China

Thank you for info.
I was looking for this hull on Taobao but I need to use 3rd party for buying from there in Ukraine and with their interest the price was flying.
Will try this with Ronny.
Btw, is this hull have modified cover only or other parts was modified as well? From the pics it looks like the same, except the cover.
I have FSR-027 in DF MK2 hull (1260mm)
It's powered by latest revision of Taurus 27cc and it's quite fast with this engine but I want to build O35 with Taurus 29,5cc and for this engine I need more stable hull. Nemo-2, I believe is the one suitable for this!

 

[Jarema Malek]

No, I just want to confirm my arguments for discussion with one of my friends who is working on his own design of the FSR-O hull.

Ok i can check when back home and will let you know.

 

[Jarema Malek]

Thank you for info.
I was looking for this hull on Taobao but I need to use 3rd party for buying from there in Ukraine and with their interest the price was flying.
Will try this with Ronny.
Btw, is this hull have modified cover only or other parts was modified as well? From the pics it looks like the same, except the cover.
I have FSR-027 in DF MK2 hull (1260mm)
It's powered by latest revision of Taurus 27cc and it's quite fast with this engine but I want to build O35 with Taurus 29,5cc and for this engine I need more stable hull. Nemo-2, I believe is the one suitable for this!

Only cover was custom.Never seen Taurus engines.who make them.Any pictures?.my Hull have 70 degree V angle if i measure it correct

 

[Oleg Baturin (UKR-167)]

Only cover was custom.Never seen Taurus engines.who make them.Any pictures?.my Hull have 70 degree V angle if i measure it correct

Thanks.
Taurus engines designed and made by Anatoly Karpov (Ukraine)

 

[Wasted wages]

Nice! looks like a CMB !?!?

Any chance of import to the USA ?

 

[Jarema Malek]

Thanks.
Taurus engines designed and made by Anatoly Karpov (Ukraine)View attachment 291947

Any more info about those engines please?.PM please

 

[Oleg Baturin (UKR-167)]

Any chance of import to the USA ?

Better if you ask him direct:
Karpov Anatoly
(easy to find on Facebook)

 

[Wasted wages]

Sorry,, no Farcebook..

 

[Oleg Baturin (UKR-167)]

Sorry,, no Farcebook..

Send me PM and I will help you to contact him.
btw, Taurus is faster and more reliable than CMB.
And it has no piston ring!
btw, I just spoke with Anatoly and he said he have just a few engines remaining and all reserved already...
unknown when new engines will be produced, due to this covid everything is complicated now
and regarding to send to USA he said it is not very good idea because of difficulty to provide service for it.

 

[Jarema Malek]

She is almost finished.Just run cables and electronics.And need starter

 

[Oleg Baturin (UKR-167)]

can not wait to see the first test run of the boat!
what prop you are going to use?

 

[Jarema Malek]

can not wait to see the first test run of the boat!
what prop you are going to use?

Hi.I will use JB1 +7 prop i have Cocr AL1/3 also and Cocr BJ1 i think

 

[Oleg Baturin (UKR-167)]

Can y

Hi.I will use JB1 +7 prop i have Cocr AL1/3 also and Cocr BJ1 i think

Can you advise diameter and pitch ratio of the above said props please?

 

[Jarema Malek]

I just asked Peter @COCR propellers thats his answer. BJ1 about 75mm and 120mm pitch, AL1/3 about 71mm and 98mm pitch I need to ask about JB1+7 (made by JEffrey Bres@ JBPipes)

 

[Oleg Baturin (UKR-167)]

hi
how is your project?

 

[Jarema Malek]

Hi Oleg.i ordered some tfl clamp for stuffing tube from Hobby Miracle and it will be here next week and trim tabs also so i will have boat ready on the next weekend but cant get engine starter anywhere in europe waiting for somebody in UK might have one not sure.

 

[rhomodel]

Try ready to win models in Italy

 

[Jarema Malek]

I did few days ago Andrea did build one starter for me and its on the way