My new project

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

andy fraser

Well-Known Member
Joined
Aug 27, 2019
Messages
114
Only my second scale build , suggestions or comments are welcome. I floor mounted the motor as far fwd as I could get it hopefully not to close to the tank. Plan to have the canard trimmable to help offset tank location. Plan on sealing center tub completely with 1 transom drain.
WIN_20200811_06_53_19_Pro.jpgWIN_20200811_06_53_33_Pro.jpgWIN_20200811_06_53_47_Pro.jpg
 
Printed my turbine tube and it might work
 

Attachments

  • 6EB6675A-4929-45D4-8D62-ED007044BE3C.jpeg
    6EB6675A-4929-45D4-8D62-ED007044BE3C.jpeg
    2.7 MB · Views: 88
  • 7AFBACBF-5CF2-4FB0-B2D8-43154CFA864C.jpeg
    7AFBACBF-5CF2-4FB0-B2D8-43154CFA864C.jpeg
    719.9 KB · Views: 90
  • AEF48275-EF3B-438D-89CA-EAED871421A4.jpeg
    AEF48275-EF3B-438D-89CA-EAED871421A4.jpeg
    665 KB · Views: 88
still need to infill the bracket, but its all one piece, still working on the clamp to bracket
 
Have not done wing stabilizer yet, miss Elam is short tube. Allrc1.com has them
 

Attachments

  • 57ADF71C-507B-468F-BC5B-FC90D3567A50.jpeg
    57ADF71C-507B-468F-BC5B-FC90D3567A50.jpeg
    2.9 MB · Views: 100
Looks good, are you using it as sacrificial linkage for the wing,or taping it to the transom to pull off. If you have the stl I would really like to try it.
 
Looks good, are you using it as sacrificial linkage for the wing,or taping it to the transom to pull off. If you have the stl I would really like to try it.

I’ll mail you the two I have if you wanna try them. My good friend I’m St Louis have them to me to try and I’m not going to use them.
 

Latest posts

Back
Top