ML Boatworks GSX470

Help Support intlwaters.com:

Chris Migliaccio

Well-Known Member
Joined
Dec 24, 2019
Messages
85
I bought an ML Boatworks GSX470, and had a chance to do a quick test fit assembly of the kit, and then disassembled it, Mike makes a high quality kit! I started gathering parts for the build. The mailman delivered my CP Mods 29.5 engine over the Christmas break. I picked up some West systems 206 and 207 hardener for the build. I am getting a list ready of the parts I’ll need for the build, and gonna start to order. Once I get the parts gathered up, I’ll start a build thread. The posts maybe a little slow.
 

Attachments

  • 17AE0947-4D3D-45D9-8128-7AC5798A2C12.jpeg
    17AE0947-4D3D-45D9-8128-7AC5798A2C12.jpeg
    737.5 KB · Views: 43

Wasted wages

Well-Known Member
Joined
Jan 2, 2006
Messages
1,566
No time like the present !!!
Get after that sucker,, would make a great winter project to be ready for racing later this year... 😉 🍿

Chris, did you make the move from Florida to where the ponds turn solid this time of year?
 

Chris Migliaccio

Well-Known Member
Joined
Dec 24, 2019
Messages
85
No time like the present !!!
Get after that sucker,, would make a great winter project to be ready for racing later this year... 😉 🍿

Chris, did you make the move from Florida to where the ponds turn solid this time of year?
We are still looking, I’m working in Texas right now, so I’m kinda gathering parts. Then I’ll have everything to complete, once I start it. Got the important part out of the way, the cpp mods 29.5, can’t wait to run it.
 

Chris Migliaccio

Well-Known Member
Joined
Dec 24, 2019
Messages
85
I was back in Florida for a few days, and I decided to work on my GSX470. I got the framing done of the sponsons, and framed up the hull. I wanted to assemble using G-Flex 650 epoxy, but it was not available at the West Marine locations near me in Florida. I bought some of the West Systems G-Flex 655-8 thickened epoxy for the build. Everything went together nice, and with some clamping and sanding, all is square and straight. I will be leaving for another 6 weeks, for work, and will continue once I get back to Florida. 834CA241-7909-4F1E-A38C-CA7B55EB150D.jpeg 59579333-856E-4FA4-8AF8-1889D026CD24.jpeg 62F5F6DB-6FF7-4439-87A8-1708F593B437.jpeg 96C5B2EF-B538-4B5C-8C17-DACA05568B12.jpeg A416F92D-D267-457E-BCFE-661C1CB6F194.jpeg 3139D923-5119-4A2C-A4EE-544550553200.jpeg 9F2ABD64-DACE-480C-A0CC-A2BEAEB59F89.jpeg
 

DINO HALLMARK Sr

Active Member
Joined
Feb 9, 2022
Messages
44
How c
I bought an ML Boatworks GSX470, and had a chance to do a quick test fit assembly of the kit, and then disassembled it, Mike makes a high quality kit! I started gathering parts for the build. The mailman delivered my CP Mods 29.5 engine over the Christmas break. I picked up some West systems 206 and 207 hardener for the build. I am getting a list ready of the parts I’ll need for the build, and gonna start to order. Once I get the parts gathered up, I’ll start a build thread. The posts maybe a little slow.
How can I get in touch with Mike I've tried everything. Trying to buy a 48" mono.
 
Top