Looking for 45 Header pipe

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Tim Smith

Well-Known Member
Joined
Mar 23, 2013
Messages
98
I need a header pipe for a CMB 45 EVO that has a 5* angle. The pipe needs to fit down under the cowl and the 10* is not the right angle to line up with the header pipe.
Thanks

Tim Smith
 
I need a header pipe for a CMB 45 EVO that has a 5* angle. The pipe needs to fit down under the cowl and the 10* is not the right angle to line up with the header pipe.
Thanks

Tim Smith

Tim,
I have a Gary Jensen header from Rattle Snake RC.
Lemme check it to see if it fits my RS 45. Will get back to you.
But just an FYI the CMB 10* does work
I have a few Sport-40's set up with them.
 
Did you contact to John Steltzer ? He bought header 0 degree from Derek Owen Good Luck!
 
Tim,
I have a Gary Jensen header from Rattle Snake RC.
Lemme check it to see if it fits my RS 45. Will get back to you.
But just an FYI the CMB 10* does work
I have a few Sport-40's set up with them.


Thanks for you help... how do you rotate the header and clear the flywheel and the spring are rotated around as well... Maybe Im looking to hard at this
 
Thanks for you help... how do you rotate the header and clear the flywheel and the spring are rotated around as well... Maybe Im looking to hard at this
Tim,
Sorry for not replying back about the Jensen header. It WILL NOT work on the RS/EVO style engine. The diameter of the flywheel interferes with the header flange.
What hull are you trying to lay the pipe down into.
I could snap a couple of pics inside some of my boats.
 
It is my boat that we molded from a old friend (25years ago). I would like the header to stay inline with the pipe to help on the couplers life.
 

Attachments

  • DF54E387-A97F-4905-9C5C-D22006170CC2.jpeg
    DF54E387-A97F-4905-9C5C-D22006170CC2.jpeg
    1.4 MB · Views: 23
  • FC723BD6-6C7C-4ACC-AF55-E1890C6E2EA6.jpeg
    FC723BD6-6C7C-4ACC-AF55-E1890C6E2EA6.jpeg
    1.5 MB · Views: 24
  • C1E124C3-F77A-49D5-BE1B-143079C59F40.jpeg
    C1E124C3-F77A-49D5-BE1B-143079C59F40.jpeg
    1.5 MB · Views: 20
  • 2D73C84F-566B-43E2-A389-0196D903B2EC.jpeg
    2D73C84F-566B-43E2-A389-0196D903B2EC.jpeg
    1.5 MB · Views: 18
Tom Foley (here on IW) was able to cut / reweld a couple headers to lay down under the deck for my Sport 40 and 1/8 scales. He can do set them to whatever angles you need. They look and work great.
Hope this helps.
Chris
 
Tom Foley (here on IW) was able to cut / reweld a couple headers to lay down under the deck for my Sport 40 and 1/8 scales. He can do set them to whatever angles you need. They look and work great.
Hope this helps.
Chris
I second this option. Tom is an excellent welder and great pricing.
Mike
 
Back
Top