Looking for 45 Header pipe

Help Support intlwaters.com:

Tim Smith

Well-Known Member
Joined
Mar 23, 2013
Messages
48
I need a header pipe for a CMB 45 EVO that has a 5* angle. The pipe needs to fit down under the cowl and the 10* is not the right angle to line up with the header pipe.
Thanks

Tim Smith
 

FloridaScaleBoater

Well-Known Member
Joined
Oct 2, 2005
Messages
6,262
I need a header pipe for a CMB 45 EVO that has a 5* angle. The pipe needs to fit down under the cowl and the 10* is not the right angle to line up with the header pipe.
Thanks

Tim Smith
Tim,
I have a Gary Jensen header from Rattle Snake RC.
Lemme check it to see if it fits my RS 45. Will get back to you.
But just an FYI the CMB 10* does work
I have a few Sport-40's set up with them.
 

ALLAN YUEN

Well-Known Member
Joined
Jan 14, 2005
Messages
5,930
Did you contact to John Steltzer ? He bought header 0 degree from Derek Owen Good Luck!
 

Tim Smith

Well-Known Member
Joined
Mar 23, 2013
Messages
48
Tim,
I have a Gary Jensen header from Rattle Snake RC.
Lemme check it to see if it fits my RS 45. Will get back to you.
But just an FYI the CMB 10* does work
I have a few Sport-40's set up with them.

Thanks for you help... how do you rotate the header and clear the flywheel and the spring are rotated around as well... Maybe Im looking to hard at this
 

FloridaScaleBoater

Well-Known Member
Joined
Oct 2, 2005
Messages
6,262
Thanks for you help... how do you rotate the header and clear the flywheel and the spring are rotated around as well... Maybe Im looking to hard at this
Tim,
Sorry for not replying back about the Jensen header. It WILL NOT work on the RS/EVO style engine. The diameter of the flywheel interferes with the header flange.
What hull are you trying to lay the pipe down into.
I could snap a couple of pics inside some of my boats.
 

Tim Smith

Well-Known Member
Joined
Mar 23, 2013
Messages
48
It is my boat that we molded from a old friend (25years ago). I would like the header to stay inline with the pipe to help on the couplers life.
 

Attachments

ChrisCapaldi

Well-Known Member
Joined
Jan 25, 2004
Messages
754
Tom Foley (here on IW) was able to cut / reweld a couple headers to lay down under the deck for my Sport 40 and 1/8 scales. He can do set them to whatever angles you need. They look and work great.
Hope this helps.
Chris
 

Mike Hughes

Well-Known Member
Joined
Feb 23, 2003
Messages
3,098
Tom Foley (here on IW) was able to cut / reweld a couple headers to lay down under the deck for my Sport 40 and 1/8 scales. He can do set them to whatever angles you need. They look and work great.
Hope this helps.
Chris
I second this option. Tom is an excellent welder and great pricing.
Mike
 

Latest posts

Top