Discussion in 'Fast Electric Forum' started by Leo Ho, Oct 15, 2011.
JetChopper30 mono deep v hull frp ELECTRIC
When will you start construction? Will you build it from wood or have a foam mold blank cnc'd then go with fiberglass? Mr. Ho what software do you draw in sir?
Go to cnc the prototype on tomorrow. Prototype material would be phenolics resin block, a brown coloured plastic block. Will post pictures then. The software was SolidWorks.
Nice! Cant wait to see the process.Very educational for sure.
Man that is sweet!
How much do do one of my designs
Doing polishing the plug now. Then offset moulding, polishing. All these are very time consuming. Might not able to read this thread and reply on time.
Looking for distributors for this product: http://www.btorcboat...JC30_0001.shtml
AWW MANNNNNN! WOW. I want a 40 incher just like that sir.
send one to me and i will do some testing for you
I am now making more offset moulds. Can send a hull to you by next month.
Looking for distributors for this hull.
Happy rc boating,
First made item:
Forthcoming items would be joined by coloured resin to make the joint invisible.
Set up for race NAMBA P-Limited MONO class:
Boat set up and video by: firstname.lastname@example.org
Went to test with a heat race prop; lake was really blown out, but I used the opportunity to see what it'll do in the rough. With the 2S batteries right on the centerline allowed with rear motor mounting, the low cg/rollcenter made for great stability. Bring on the racewater ! (race debut next week at WWVIII)
Using one of Benjamins 140A speed controls sent for testing, hence the FCR graphics
Mr. Ho i ran across something that might be very useful tool in your hands:
Sweet little mono Chopper.
Almost standardized process of making:
As boaters suggested. Need a stronger boat bottom. Tested with one with the rear 55% of the bottom and transom made with double fiber layers, equivalent to 600g/m^2. Weight increased by 90g. Feel that the bottom is now very strong. The hull weight is now 850g.
Believe that can make the whole bottom and transom with double fiber layers and can maintain the same shipping cost. Estimated hull weight should be 880g.
Separate names with a comma.