JAE sponsons help please

[Iain Pickersgill]

Good afternoon gents, I am hoping someone may be able to assist, I am building a JAE 21 and all is going well until I came to the sponsons and I seem to have a few extra parts compared to the instuctions, In the instructions is mentions L4 & R4 but I also have L4a & R4a and not sure why this may be. Also the shape of the front sponspons look different to the instuctions,
Can anyone share a photo of how these extra parts fit please
The insructions show below
Many thanks for your help

 

[mike walker]

It sounds to me like you have some TD parts mixed in with your GT sponson sides. Let me see if I can get you a pic of a TD sponson

 

[mike walker]

As soon as my camera charges I will get you a pic of the TD sponson

 

[mike walker]

As long as that R 4 parts has some over hang in the back you have all the parts you need. I will still send you a pic of the TD parts later

 

[Iain Pickersgill]

Many thanks for you help and assitance

 

[Buckshot]

It is for the extra ride surface faucet on the TD style front sponsons.

 

[Iain Pickersgill]

Many thanks for your help, I have taken a photo of my sponsons so you can see what I have

 

[mike walker]

With your new pics looks like you have TD sponsons. do you now get it with Buckshot's pics he did a better job of that than I could you are going to have an extra ride surface. not shown in the Manuel

 

[phill fields]

Iain here are some close ups of the sponsons Buckshot has shown, you can see the overlaps.

 

[Buckshot]

Yep what Phill said.

 

[Iain Pickersgill]

Hi all the feedback has been great,

Phil you just answered the last question I had many thanks

back of to the workshop and the glue pot

 

[phill fields]

If you can make them look as good as Buck has you get a gold star