Scott Washam
Member
- Joined
- Jul 24, 2013
- Messages
- 10
Just got a Zippkits FE 33.suggestions on motor/prop combination running on 4S. Will be oval racing. Thanks for your help
Mike
Did you find all of the components you need for your JAE 33 FE I have lots of technical info I spent 4 months last year getting my JAE 33 FE dialed in it's running a true 63mph recorded with on board GPS I have a 4S set up for your rigger everything you need if intrested let me know ??
Thanks
Ok wish you luck it's a great running rigger
I have all of my testing results as I was dialing my rigger in prop size, esc size, esc temp, motor and triming it in to track straight let me know if interested I will PM you my number.....
I am running a leopard 4082 - 1600 Kv on 6 cell 6200 mah battery. I have the 1450 prop that Ken Brown sharpened, balanced, and cupped the tips. It GPS in the 69 to 71 mph range. Good run time and doesn't get too hot. Oh yeah, a ZTW Seal 160 A esc.
OK, MIC... I guess I don't understand the ESC & Motor relationship that well. The specs on a Leopard 4082-1600Kv is 120A/33volt... I though a 150A ESC would cover that 120A Motor, even allowing it about 20-25% more Amps. I new to electrics, I guess theres other factors at play I'm not aware of...... that's why I reaching out to you guys with the experience, and expertise. Please tell me what I'm missing... I want to get on the wright track. ThanksA 4 cell setup with a 4082 motor and a 150 amp esc is a recipe for disaster. Go with 6S and your amps go down by 1/3rd. 1600KV on 6S is a good start. You may want to try an Octura M545 and or an 1816-1817 ABC. A larger ESC above 200 amps could pull bigger props,
Mic
Enter your email address to join: