I present

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Has anyone else ever tried many of their gas props on their 1.01 X mono's ?

Many gas prop numbers work on the X mono with the 1.01's really well. You will have speed and acceleration as well as great handling with many of them. The 7016 and 6717 just a couple but many others rip on these big nitro engines.

Same for nitro cats with 1.01. Thy pull the same prop as you would use for gas. Dead nut perfect prop was a gas prop.
Bought every recommended nitro prop from the prop gods for a Conquest cat and my worst gas prop still did better on it.
It ran 80 with a good gas prop. Best nitro one I ever had made was barely over 70 mph.
 
Boaters,

It would be more helpful if the gas propellers were indexed,
so you would know what you are running. It does not take
very long to index a good propeller once it is finished. The
biggest advantage is the people buying the propeller know
what they bought, and where to put it in their prop box 📦.
Also, if it runs well it is much easier to reproduce once you
have the card that has the actual numbers on it. The prop
charts are not very accurate.

David,

Was that an Octura X-470 V-Cut copy from Peter?

Enjoy Testing,

Mark Sholund
 
Boaters,

It would be more helpful if the gas propellers were indexed,
so you would know what you are running. It does not take
very long to index a good propeller once it is finished. The
biggest advantage is the people buying the propeller know
what they bought, and where to put it in their prop box 📦.
Also, if it runs well it is much easier to reproduce once you
have the card that has the actual numbers on it. The prop
charts are not very accurate.

David,

Was that an Octura X-470 V-Cut copy from Peter?

Enjoy Testing,

Mark Sholund
Hello Mark I would be confident in saying it is not a copy of x470 size propeller.
 
But have you run any of them on a X mono with a 1.01

Bob's are some of the best there is.

A few good gas ones I am referring to running on a 1.01 actually were Bob's props.
Daniel, after I spoke to you about this I tried a couple of small 7016’s. For me there was no noticeable difference from the X647 but… I’m running a NR.91, not a CMB .90 or 1.01. I’ve been warned that trying these props
with my motors might not work out well, lol. I’m gonna put a 1.01 in it and let all the gas props rip.
 
Back
Top