Herzog 43" Hurricane

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

RobertDoak

Well-Known Member
Joined
Sep 14, 2018
Messages
948
Hello everyone...
I aquired this Mono hull on a trade...i dont know anything about Mono hulls and want to start out right...first this is a old boat....transom has atleast 40 holes in it and slight delaminating on the interior wood transom doubler...also the deck to hull glue joint is not the best at the transom aswell
The bottom of the boat is slightly cupped...so I know I need some work but what hardware do I need to start on the right foot....it will have a stock 26cc zenoah...thanks everyone....
 

Attachments

  • 20210516_095612_HDR.jpg
    20210516_095612_HDR.jpg
    2.5 MB · Views: 61
  • IMG_20210516_170318_02.jpg
    IMG_20210516_170318_02.jpg
    2.1 MB · Views: 58
  • IMG_20210516_170318_01.jpg
    IMG_20210516_170318_01.jpg
    2.3 MB · Views: 57
It looks like that hull was set up per the original instructions. Speed master gas stinger, 3” or 3.5” offset rudder, 1.5”x1.5” tabs.
The three holes on the top left were for the antena mount, not needed. The three holes in the center near the top look like they were for the pipe mount. I’ll try and find the old set up instructions for it and send them to you. Follow those instructions and the boat will run great.
 

Attachments

  • 047728FF-1437-422D-A124-087712F11E00.jpeg
    047728FF-1437-422D-A124-087712F11E00.jpeg
    359.4 KB · Views: 16
  • EA65E2BF-A59E-41B6-B1E8-9386F96C143C.jpeg
    EA65E2BF-A59E-41B6-B1E8-9386F96C143C.jpeg
    333.9 KB · Views: 14
  • 1896B758-FBD4-413C-B8F1-AEFE41164EDD.jpeg
    1896B758-FBD4-413C-B8F1-AEFE41164EDD.jpeg
    311.8 KB · Views: 16
Hey Robert,

There is one in the club now - he'll be running it Sunday. It is off the mold under new ownership, so not one of Chris's boats. Supposedly, this was the first attempt at molding a boat for the shop that he used... It has definitely had some issues, but is running pretty good now. At least you can see one run for a benchmark. :)
 
Back
Top