Herzog 43" Hurricane

Help Support intlwaters.com:

RobertDoak

Well-Known Member
Supporting Member
Joined
Sep 14, 2018
Messages
745
Hello everyone...
I aquired this Mono hull on a trade...i dont know anything about Mono hulls and want to start out right...first this is a old boat....transom has atleast 40 holes in it and slight delaminating on the interior wood transom doubler...also the deck to hull glue joint is not the best at the transom aswell
The bottom of the boat is slightly cupped...so I know I need some work but what hardware do I need to start on the right foot....it will have a stock 26cc zenoah...thanks everyone....
 

Attachments

ChrisHerzog

Well-Known Member
Joined
Jan 20, 2019
Messages
311
It looks like that hull was set up per the original instructions. Speed master gas stinger, 3” or 3.5” offset rudder, 1.5”x1.5” tabs.
The three holes on the top left were for the antena mount, not needed. The three holes in the center near the top look like they were for the pipe mount. I’ll try and find the old set up instructions for it and send them to you. Follow those instructions and the boat will run great.
 

Attachments

Brannon Thompson

New Member
Joined
Sep 10, 2020
Messages
3
Hey Robert,

There is one in the club now - he'll be running it Sunday. It is off the mold under new ownership, so not one of Chris's boats. Supposedly, this was the first attempt at molding a boat for the shop that he used... It has definitely had some issues, but is running pretty good now. At least you can see one run for a benchmark. :)
 

RobertDoak

Well-Known Member
Supporting Member
Joined
Sep 14, 2018
Messages
745
Brannon...
I will toss it in the van and bring it along..discuss some options
 

Latest posts

Top