FSR-V 35cc props??

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
May 4, 2020
Messages
12
Hello everyone!
Questionnaire....
Which propellers used on FSR-V 35cc boat?
Which brand?
How many blades?
Which diametre?
Which pitch?

Osservation


Thanks!!!
 
Hello Lumache I'm not sure I can help you with prop but it sounds like you have a gas boat ? I run nitro boats if your is gas maybe check in the gas boat forum welcome to IW Jeff Barnes
 
Take a Look at : https://rc-prop.de/

he have lot of prop´s , left or right drive is possible, send him Mail what do you need ( inform him about your Engine)
 
I don't think so. 🤔 🤔 🤔
CMB35 is more powerful. Almost all FSR-V (E) 35 riders drive a CMB35.
There's probably a reason for that.;);)
 
Hi L,

There at Daves Store is 61-85 the biggest. (61 mm diameter)

https://www.prestwich.ndirect.co.uk/DMPROPS.htm
It has 1,39 pitch

You can find at Ianboats.co.uk bigger FSR props

38478603ke.jpg



I think just you could make a 3 blade prop from ABC 2314 Chopper.

https://www.modelmarinesupplies.co.uk/products.php?cat=30
Ciao
 
Last edited:
Hi L,

There at Daves Store is 61-85 the biggest. (61 mm diameter)

https://www.prestwich.ndirect.co.uk/DMPROPS.htm
It has 1,39 pitch

You can find at Ianboats.co.uk bigger FSR props

38478603ke.jpg



I think just you could make a 3 blade prop from ABC 2314 Chopper.

https://www.modelmarinesupplies.co.uk/products.php?cat=30
Ciao


Thank you so much for the advice!!
There is a further problem though ... I would need both left and right rotation of the propellers... here everything gets complicated...

PS then ABC "Cleaver" are not good for submerged propulsion!?! (bat propeller blade) Are "immersed choppers" defined?
Is there an updated ABC catalog? on their site is from 2010...
 
I have data from German competitor Adam C. Used prop MOCOM 2735 (old designation).

Thank you so much for the advice!!
There is a further problem though,
as said in the previous answer...

.. I would need both left and right rotation of the propellers... here everything gets complicated...
 
Hi L,

I think just you have the possibility to write to TJ Models how to get left rot FSR prop from 7075 Alu or you have to search to any Octura pair and prop tuning specialist.
 
Hi L,

I think just you have the possibility to write to TJ Models how to get left rot FSR prop from 7075 Alu or you have to search to any Octura pair and prop tuning specialist.



I will write as soon as possible !!

I found Octura X665 both left and right ... but I think it is too small 65 in diameter. Ideal sandbox X670 .. but I never found ...
 
Back
Top