Car engine conversion mounts?

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Attachments

  • 20190811_153625.jpg
    20190811_153625.jpg
    367.4 KB · Views: 133
  • 20190811_153615.jpg
    20190811_153615.jpg
    282.5 KB · Views: 139
  • gold head 45 bell housing.jpg
    gold head 45 bell housing.jpg
    553.1 KB · Views: 139
No won't won't on OS lower besides flex shaft to small. These made to adapt to lawless 45/67 lower or K & B 45 lower
 
The 21 beta would be to long & stick to far up, beleave me I've look at it they good motors
 
So
Fred do you have any pictures of your set up?
Thanks
Greg
Sorry for all delays in this project. Here are some pix of the finished unit. I will put an ad in the for sale section so anyone that wants one can call and order. Not shown in the pix are the driver adapter for the motor and the mounting hardware.
 

Attachments

  • outlaw1.JPG
    outlaw1.JPG
    247.6 KB · Views: 61
  • outlaw2.JPG
    outlaw2.JPG
    281.4 KB · Views: 61
  • outlaw3.JPG
    outlaw3.JPG
    277.3 KB · Views: 59
  • outlaw4.JPG
    outlaw4.JPG
    313.1 KB · Views: 83
  • adapter004.jpg
    adapter004.jpg
    263.1 KB · Views: 83
Joey is correct. You can mount the unit on a K&B or OS 3.5 drive and also on a lawless (minus the motor mount plate of the drive.)
 
I just found this item on Amazon. A car pipe with 180 degree header and hardware for under $20.00. Search on Amazon for this "Dilwe Car Exhaust Pipe"> It is almost identical to the one Rod used on his prototype.
 

Attachments

  • 1644776773573.png
    1644776773573.png
    38.2 KB · Views: 36
Back
Top