C 19 relief

[dr gary turner]

Carbon fiber plate
The tube is a SANDWICH of .030 CF plate 1/8 4# density dyvinicil and 1/32 plywood
Top is .030 CF plate and bottom 1/32 plywood

 

[GraysonTaylor]

Nice

 

[dr gary turner]

Progress, adjuster block built

 

[Danny King]

Moving right along

 

[dr gary turner]

It takes time developing templates and jigs and taking a pile of plywood dyvinicil and CF and then to cut all of the pieces and build a boat

 

[dr gary turner]

Holes in the bottom of the tub

 

[dr gary turner]

The Bullard Turner methodology of putting tubes in the sponsons

 

[Bradley Maglinger]

What are you gonna call this boat?

 

[Ray Sametz]

What are you gonna call this boat?

DOC-19 might be a start.

 

[SayMikey]

Looks great Doc

 

[dr gary turner]

Thanks. I am glad I have this hobby especially at this time of being shut up in the house. Just going to the shop and piddling has been good.

Today’s goal was getting shaft log glued in. NO S BEND

 

[dr gary turner]

Beginning to look like a boat

 

[Buckshot]

The Bullard Turner methodology of putting tubes in the sponsons

I do something similar.

 

[dr gary turner]

Yes, it’s a good methodology and it WORKS

 

[Stuart Barr]

Thanks. I am glad I have this hobby especially at this time of being shut up in the house. Just going to the shop and piddling has been good.

Today’s goal was getting shaft log glued in. NO S BEND

Doc,

Why no "S" bend?

Stu

 

[dr gary turner]

Stu, drag. I am also going to build a wire drive and put it in the boat

 

[dr gary turner]

Beginning radio installation

The servos are Sub micro
Great servos but very small
I needed my mill to make the servo mounts. Very tight tolerances due to size

 

[RaceMechaniX]

Doc what servo's are those?

 

[dr gary turner]

ProModeler Sub micro

The one you see for the rudder is not going to work. Just ordered a micro 150

As mentioned I need to use the mill to make the mounts. The mounting hole is so close there is not room for a 2-56 washer. They are mounted with a 2-56 Allen head.

 

[Chris Wood]

looks familiar doc

looking good