• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Bulkhead fittings & rubbers (for those who use such)

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Joern Markset

Well-Known Member
Supporting Member
Vendor
Joined
Oct 25, 2004
Messages
1,122
Bulkhead fittings with O-ring seals inside/outside.
Designed for wall thickness 3 mm (0.120) - 8 mm (0.320") and 14 mm (0.550") thru hole
ID = 8,9 mm (0.350") designed to be able to push thru a Dubro heavy duty 4-40 link (without the ball)
OD where the bellow sits = 11 mm (0.430")
Fittings are made in Norway, and the material used is POM (Polyoxymetylen)
Comes with the best rubber bellows money can buy (made in Germany)

I have 25 pcs left from the latest batch, and I prefer to sell them as a lot. $ 220,- including shipping. PP as FF
May be crossposted.
I will throw in an extra good handfull (if you have big hands) of misc bellows (shown in pic 1775)
 

Attachments

  • IMG_1772.jpg
    IMG_1772.jpg
    892.5 KB · Views: 0
  • IMG_1773.jpg
    IMG_1773.jpg
    440.5 KB · Views: 0
  • IMG_1774.jpg
    IMG_1774.jpg
    1.1 MB · Views: 0
  • IMG_1775.jpg
    IMG_1775.jpg
    1.6 MB · Views: 0
  • IMG_1776.jpg
    IMG_1776.jpg
    1.4 MB · Views: 0
Back
Top