• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Parts For Sale Boat Room Clean Up Nitro #1

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

happybradboating

Well-Known Member
Joined
Jul 3, 2007
Messages
1,083
Picture #1 Qt.2 7.5 OPS Pipes $20.00 (Left) & $15.00 (Right) Qt.1 Pipe Bracket $3.00 SOLD

Picture #2 Qt.-2 Standard 3/16 Cables Cut Down to 21” & Qt.-1 Square Cable 25 3/4

Picture #3 Misc. Parts: Throttle Clamp (New $3.00 & $2.00 Used)

Picture #3 Hyperformance Stub Shaft $5.00 (I am not sure what it fits 7.5cc?) SOLD

*If interested in other parts under #3 please request what catches your eye.

Picture #4 Qt.-2 Teflon Tubing 24” $4.00 each

Picture #5 Qt.-5 New Hitec HS-225SS $10.00 each PENDING & Qt.-1 HS-82MG $15.00 SOLD

Picture #6 Hitec HS-5645MG $30.00 & Qt.-1 HS-82MG $15.00 & Futaba 3003 $5.00
*HS-5645MG Chuck Pending Payment *HS-82 MG Tommy Pending Payment

Picture #7 Qt.-3 Dubro Motor Mount $5.00 each SOLD & Dubro Switch Assemblies $2.70 SOLD

Picture #8 Hobbico Switch $6.00, Tower Switch $5.00, & Mini Futaba Switch $4.00
*Switches Chuck Pending Payment

If paying by Paypal do as ff or fees. I accept USPS M.O. for payment. Please only respond to this post, no PM unless payment arrangements and shipping location is needed.
 

Attachments

  • 20220617_094511.jpg
    20220617_094511.jpg
    1.2 MB · Views: 0
  • 20220617_094953.jpg
    20220617_094953.jpg
    1.4 MB · Views: 0
  • 20220617_110848.jpg
    20220617_110848.jpg
    1.4 MB · Views: 0
  • 20220617_111616.jpg
    20220617_111616.jpg
    3.2 MB · Views: 0
  • 20220617_112346.jpg
    20220617_112346.jpg
    3.1 MB · Views: 0
  • 20220621_105313.jpg
    20220621_105313.jpg
    1 MB · Views: 0
  • 20220621_105453.jpg
    20220621_105453.jpg
    1.3 MB · Views: 0
  • 20220621_105630.jpg
    20220621_105630.jpg
    1.1 MB · Views: 0
Last edited:
Brad..I replied in both threads. Is there only one 5645? Or are there several. I am also interested in the 645.
Let me know if I did not interpret the add correctly.

Chuck
 
Brad..I replied in both threads. Is there only one 5645? Or are there several. I am also interested in the 645.
Let me know if I did not interpret the add correctly.

Chuck
Hi Chuck, In this thread I have you down for Qt.-1 Hitec HS-5645MG $30.00, Hobbico Switch $6.00, Tower Switch $5.00, & Mini Futaba Switch $4.00
I will list off your requests in the other thread. The total HS-5645MG are Qt.-3 between both threads.
Thanks, Brad
 
Please everyone if not done already send your shipping address by PM so I can calculate final cost & provide my Paypal information.

Thank you, Brad
 
i'll take the 82mgs and the pipe bracket in picture #1.
Hi Tommy, I have you down for Qt.-2 HS-82MGs & the flat pipe bracket in #1. Please send me your shipping address by PM & then I will calculate parts, & shipping. Once I have the information needed my Paypal will be provided.
 
Please everyone, request what you want by posting it on the thread. No PM as I requested at the start.

Thank you, Brad
 
Sorry I’m new, Just being honest. Is the Teflon tubing sold? Hope not to dumb of a question is that QT stand four quarter I take it. But is that inner or outer dimensions?

Thanks
Will
 
Picture #1 Qt.2 7.5 OPS Pipes $20.00 (Left) & $15.00 (Right) Qt.1 Pipe Bracket $3.00
*Pipe Bracket Tommy Pending Payment

Picture #2 Qt.-2 Standard 3/16 Cables Cut Down to 21” & Qt.-1 Square Cable 25 3/4

Picture #3 Misc. Parts: Throttle Clamp (New $3.00 & $2.00 Used)

Picture #3 Hyperformance Stub Shaft $5.00 (I am not sure what it fits 7.5cc?) SOLD

*If interested in other parts under #3 please request what catches your eye.

Picture #4 Qt.-2 Teflon Tubing 24” $4.00 each

Picture #5 Qt.-5 New Hitec HS-225SS $10.00 each & Qt.-1 HS-82MG $15.00
*HS-82MG Tommy Pending Payment

Picture #6 Hitec HS-5645MG $30.00 & Qt.-1 HS-82MG $15.00 & Futaba 3003 $5.00
*HS-5645MG Chuck Pending Payment *HS-82 MG Tommy Pending Payment

Picture #7 Qt.-3 Dubro Motor Mount $5.00 each SOLD & Dubro Switch Assemblies $2.70 SOLD

Picture #8 Hobbico Switch $6.00, Tower Switch $5.00, & Mini Futaba Switch $4.00
*Switches Chuck Pending Payment

If paying by Paypal do as ff or fees. I accept USPS M.O. for payment. Please only respond to this post, no PM unless payment arrangements and shipping location is needed.
Brad
if not sold I will take the H225BB servoes @ 10.00 each
Walt Barney
 
Sorry I’m new, Just being honest. Is the Teflon tubing sold? Hope not to dumb of a question is that QT stand four quarter I take it. But is that inner or outer dimensions?

Thanks
Will
Hi Will, The Teflon tubing is still available. The inner part is sized for 3/16 cables. Let me know if you need the outer. We have all started new to the game!
Thanks,
Brad
 
Back
Top