TomGracey
Well-Known Member
- Joined
- Dec 5, 2018
- Messages
- 466
For Sale SOLD
NEW never installed or run
Alien Power 300amp 3s-12s lipo Boat ESC
Presently programed for 1/8 Scale Hydro's.
A download of their software from their site and use of short usb cable supplied with esc. Should U wish to reprogram the ESC and instructions
Downloads
Retail’s for $249.95 Asking $125.00 firm shipped the the US lower 48 only Sorry NO International
It has 5 mega capacitors of 63v, 470mf, 8agw wire with battery spark suppression wire, heat sink, powerful Mosfet, USB link to program it.. No BEC. A Receiver pack is required.Factory Siliconed to provide water resistance but it's not claimed to be totally waterproof.Measures 6 3/4 long, 2 1/4 wide and 3/4 high. It's thin Programming link cord included. 8 AWG wire. Transmitter calibration is automatic.Specs:Size: 160 x 60 x 20 – Weight: 370gBattery voltage from 3S to 12S.Simply set function value by Pro-Box, by PC via USB kits or by trasmitter.Two way communication while connecting it with computer.Firmware will be upgraded automatically.LVCTiming settings may be adjusted (0°- 30°)per degree to suit the motor type3 types of throttle curve3 types of acceleration control.Motor rotation programmable.Auto cut off power within 3 seconds in case of signal loss.This ESC is made in the United Kingdom through "Alien Power Systems”
NEW never installed or run
Alien Power 300amp 3s-12s lipo Boat ESC
Presently programed for 1/8 Scale Hydro's.
A download of their software from their site and use of short usb cable supplied with esc. Should U wish to reprogram the ESC and instructions
Downloads
Retail’s for $249.95 Asking $125.00 firm shipped the the US lower 48 only Sorry NO International
It has 5 mega capacitors of 63v, 470mf, 8agw wire with battery spark suppression wire, heat sink, powerful Mosfet, USB link to program it.. No BEC. A Receiver pack is required.Factory Siliconed to provide water resistance but it's not claimed to be totally waterproof.Measures 6 3/4 long, 2 1/4 wide and 3/4 high. It's thin Programming link cord included. 8 AWG wire. Transmitter calibration is automatic.Specs:Size: 160 x 60 x 20 – Weight: 370gBattery voltage from 3S to 12S.Simply set function value by Pro-Box, by PC via USB kits or by trasmitter.Two way communication while connecting it with computer.Firmware will be upgraded automatically.LVCTiming settings may be adjusted (0°- 30°)per degree to suit the motor type3 types of throttle curve3 types of acceleration control.Motor rotation programmable.Auto cut off power within 3 seconds in case of signal loss.This ESC is made in the United Kingdom through "Alien Power Systems”
Last edited:
