• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Boats For Sale '74 Pay n' Pak 1/10th FE

Help Support intlwaters.com:

Don Ferrette

Administrator
Staff member
Admin
Moderator
Joined
Nov 25, 2003
Messages
15,296
For Sale- brand new ML Boatworks 1/10 FE '74 Pay 'n Pak 100% turn key. This boat has never even touched the water yet, only bench tested the set up. Dynamite M3835/A3630 6 pole 1500kv motor, HW Seaking 180A ESC, 4 Dinogy Graphine 2S 6600mah packs, Speedmaster hardware, Tyndall turn fin, prop, Futaba 4PK TX (just back from Futaba check up) and 603FS RX. PPG acrylic urethane paint. Also included are 3 spare Dynamite M3835 motors, ESC programmer and extra connectors. Boat is set up for CW racing but aluminum backing plate for turn fin is also behind left sponson heel for CCW racing as some do. I have over 20 pics of the build if interested, this one is super nice!! $1750 with Futaba TX/RX, $1500 without TX/RX plus actual shipping/insurance costs . Please keep in mind the TX, batteries and motors will ship in separate box and I will have a custom HD box built for the boat which will be part of shipping costs. Also for sale in other forums.

SOLD to Robert

PakbuildS.jpgPakbuildT.jpgPakbuildU.jpgPakbuildV.jpgPakESC.jpgPakTX.jpg
 

Mike Hughes

Well-Known Member
Joined
Feb 23, 2003
Messages
3,338
Just curious Don, is there a place where they run these CW? I know around here we run CCW.
MIke
 

Don Ferrette

Administrator
Staff member
Admin
Moderator
Joined
Nov 25, 2003
Messages
15,296
Just curious Don, is there a place where they run these CW? I know around here we run CCW.
MIke
We run CW here in D12. It was built so whichever way might become predominant in IMPBA (as in if CCW was the way as we have no formal national class as of yet) a simple shaft and prop change along relocating turn fin would be all that was needed. I put aluminum backing plates on both sides.
PakbuildB.jpgPakbuildC.jpgPakbuildD.jpgPakbuildE.jpg
 

Robert Conner

New Member
Joined
Oct 18, 2021
Messages
4
I'm interested in the package less the radio. Also, re: batteries, are these new, used, and if used, how many cycles, approx.? Thanks.
 

Don Ferrette

Administrator
Staff member
Admin
Moderator
Joined
Nov 25, 2003
Messages
15,296
I'm interested in the package less the radio. Also, re: batteries, are these new, used, and if used, how many cycles, approx.? Thanks.
All 4 Dinogy's are brand new, cycled twice and storage charged. Everything in the boat is new except for TX/RX (but that's not relevant to you :)) . Two of the three spare motors are definitely new and most likely the third (guy I got it from said he was fairly certain it never got powered up).
 

Robert Conner

New Member
Joined
Oct 18, 2021
Messages
4
All 4 Dinogy's are brand new, cycled twice and storage charged. Everything in the boat is new except for TX/RX (but that's not relevant to you :)) . Two of the three spare motors are definitely new and most likely the third (guy I got it from said he was fairly certain it never got powered up).
OK, and thanks, Don. Let's make it happen. How to best proceed?
 

Don Ferrette

Administrator
Staff member
Admin
Moderator
Joined
Nov 25, 2003
Messages
15,296
OK, and thanks, Don. Let's make it happen. How to best proceed?
P/m me your shipping info so I can figure best shipping option for you. I'll need to get moving on a box for it, got a guy who custom makes them when I need one.
 

Latest posts

Top