PiroSteel
Well-Known Member
- Joined
- Jan 14, 2016
- Messages
- 105
Hi all here,
I'm coming from OffshoreElectrics forum becouse here are many more nitro friends
I have for sale a never used unique boat.
28" Syncron Mono with 2,5 ccm Novarossi assembled with all hardwares, rc box as in the pictures for 900 $
This isn’t cheap but including more work time than you could now pay for it!
Shipping cost 50 $
Additonal remark
A ready standard white electric 720mm Syncron costs with flood chamber and stand 400 €
For fast alpine fundesign in neon yellow-black with pearl effect could be extra as material and time, even decals are additional charge.
What else should be done in addition to nitro version and the individual production costs approximately:
Bulkheads to front and back instead flood chamber is in the same level.
Engine mount kit 50 €
RC box with neoprene frame and 5mm plexiglass cover with fixing attachment and servo holder 45 €
Air openings for cabin to front and rear and attachment from carbon by front € 20
Cabin lock to back from carbon-alu 2x15 €
Fuel tank from US 7 €
Rebuilt adjustable strut with 5mm steel stainless shaft (1.4441 Swiss implant) instead of 3/16 and 3.75mm Octura flex shaft 20 €
Water cooling tube through RC box
Novarossi MX 15 PR 250 €
http://www.novarossi.it/2012/index.php/en/products/marine-engines-top/2-5-cc/t-mx15pr.html
In comparison, a version of Nitro vs Electric
Yes, seems like always for you to know - believe it or not - brutal much work.
If 10 people would start with the same sovereign tasks, it would be interesting which quality and total time on stopper watch could be on the tables.
Otherwise, if it should be so far from 2x5 pcs of boats could run the men in the little oval course for NAMBA P-Mono, then the best 5 could make a real final
Thanks
Joseph Toth
I'm coming from OffshoreElectrics forum becouse here are many more nitro friends
I have for sale a never used unique boat.
28" Syncron Mono with 2,5 ccm Novarossi assembled with all hardwares, rc box as in the pictures for 900 $
This isn’t cheap but including more work time than you could now pay for it!
Shipping cost 50 $
Additonal remark
A ready standard white electric 720mm Syncron costs with flood chamber and stand 400 €
For fast alpine fundesign in neon yellow-black with pearl effect could be extra as material and time, even decals are additional charge.
What else should be done in addition to nitro version and the individual production costs approximately:
Bulkheads to front and back instead flood chamber is in the same level.
Engine mount kit 50 €
RC box with neoprene frame and 5mm plexiglass cover with fixing attachment and servo holder 45 €
Air openings for cabin to front and rear and attachment from carbon by front € 20
Cabin lock to back from carbon-alu 2x15 €
Fuel tank from US 7 €
Rebuilt adjustable strut with 5mm steel stainless shaft (1.4441 Swiss implant) instead of 3/16 and 3.75mm Octura flex shaft 20 €
Water cooling tube through RC box
Novarossi MX 15 PR 250 €
http://www.novarossi.it/2012/index.php/en/products/marine-engines-top/2-5-cc/t-mx15pr.html
In comparison, a version of Nitro vs Electric
Yes, seems like always for you to know - believe it or not - brutal much work.
If 10 people would start with the same sovereign tasks, it would be interesting which quality and total time on stopper watch could be on the tables.
Otherwise, if it should be so far from 2x5 pcs of boats could run the men in the little oval course for NAMBA P-Mono, then the best 5 could make a real final
Thanks
Joseph Toth
