- Joined
- Jul 24, 2002
- Messages
- 7,124
Older versions without the extra transfer port that caused the sleeve to crack.
One is new except for a little time on the head, plus there's one good used needle roller (don't ask). The other has maybe eight gallons through it and has lots of life left. There's an extra new piston/sleeve and a used set, plus a set of Wood's head shims. No carbs.
Both have a groove cut in the exhaust header so you can run the coupler right on it, no header with springs. Also the flywheels have been trimmed for clearance and magnets pressed in if you ever want to run an rpm sensor.
Think US$600 for the lot is a fair price, shipped Canada or the lower 48, others pay the difference.
Paypal friends and family or EMT/Zelle only.
One is new except for a little time on the head, plus there's one good used needle roller (don't ask). The other has maybe eight gallons through it and has lots of life left. There's an extra new piston/sleeve and a used set, plus a set of Wood's head shims. No carbs.
Both have a groove cut in the exhaust header so you can run the coupler right on it, no header with springs. Also the flywheels have been trimmed for clearance and magnets pressed in if you ever want to run an rpm sensor.
Think US$600 for the lot is a fair price, shipped Canada or the lower 48, others pay the difference.
Paypal friends and family or EMT/Zelle only.
Last edited: