Parts Wanted 100* 7/8 Header (ZippKits Style)

[Jarcaines]

I’m looking for a ZippKits or similar 100* no-leak seal header. I have a 90* I can trade if you want it, or will purchase. ZippKits is out of stock.​

 

[topfuel443]

Will this work?

https://stumpfabrication.com/products/105-degree-7-8-header?_pos=1&_sid=d8e39a53d&_ss=r

 

[Mike Hughes]

JR,
When are coming over to do whatever it is you needed me to do. You can swap me one then. I have one. Or maybe you just need to get me a replacement when you can.
Mike

 

[Mike Hughes]

Just check gizmo. They have them.
Mike

 

[Jarcaines]

Will this work?

https://stumpfabrication.com/products/105-degree-7-8-header?_pos=1&_sid=d8e39a53d&_ss=r

I think 105 puts it a bit too to the right of most hulls, correct?

 

[Jarcaines]

Ordered one from Gizmo. Thanks Mike and Gabe.

 

[Mike Hughes]

My Y21 requires 105 with the way the deck is. Otherwise you have to cut it out.

 

[Jarcaines]

My Y21 requires 105 with the way the deck is. Otherwise you have to cut it out.

Hmm… I am trying to line up with the hole Mark already had cut in the deck of the Calcraft I got from him. I suppose I should ask him which header he used…

@Mark Anderson?

 

[Mark Anderson]

I used a 100 degree, but It was a Quickdraw that has a bit of flex. You should be good with what you ordered. Disregard Hughes. I run 100 degree in both of my Y21s.

 

[Mike Hughes]

100 degree hot pipe aint no 100 degree standard pipe. Much easier with that little flex in the pipe. Disregard Anderson....LOL
Mike