Search results

Hi, just wanted to thank you again for your suggestion. It works like a charm. 🙂 Vince

No, I just shut it off with killer bee switch. No after run oil when I plan to use it within that same week again.

Thank you, will try that.

Hey guys, I have a stock zenoah 26 with a stock 257 walbro, from cold sometimes it takes over ten pulls to start. However, once it starts and warms up it'll fire on the first pull. The needles are set 2L 1H. Gasoline 90 Octane 25:1 ratio. I'm priming it with my finger over carb throat. My...

This little boat is awesome. Here's a video of it pulling it's own weight.😊

Yes, I did. It went pretty good. Gotta tinker with CG and strut angle as it was riding a little stern heavy. Will try to get a video of it sometimes soon. 😊

Ya, my order took almost two months to come in. Granted I'm in Canada, but still...

Ya, I'm thinking the same. Thx 🙂

Hey, guys...trying to zero in on the CG for my Max cat. On this style hull, which is considered the transom: A or B (see attached photo) Thx Vince

I had the same problem with water flooding the hull in minutes. This is how I solved the problem: I cut the cowling in two, the nose portion is permanently affixed so that water will not get in from there, aft portion is taped down. I moved the rudder rod to exit the transom and sealed hole in...

Thanks, Robert.

I finally completed my Max cat build.

Thank you Robert...ya, according to our local groundhog we should be getting an early spring, so this baby will be hitting the water pretty soon. Still waiting on drive shaft, prop and decals before I can complete it.

Happy new year to you too, Robert. Finally got the cat painted. Came back from the shop today. I went with a metallic flake gray, as I intent to do it up in a Toronto Raptors colour scheme (current colours).

Ty...I'm planning on a stock 26, which I don't have yet. So if something a little bigger, but with the same footprint catches my eye, I might consider it. I have a few months before this thing hits the water, anyway.😉

First coat of primer is on. There are a few spots that require a little filler and more sanding.😓

The whole hull has been sealed with two parts epoxy inside and out, most of it sanded down to 300 grit. Will go up to 400 grit, then prime and see what surface flaws need tended to. I was worried about weight using mostly1/8" luan, but so far it weighs around 7lbs including the radio box. So I...

Thanks, Rob. Ya, pretty pleased with it so far. 😊

Getting there...endless sanding, then sealing, and more endless sanding. Lol

Ya, I'm pleased with how it came out...got it down to 6.5 oz . My dropped header came in today and pipe fits nicely and out of the way of the future radio box.