Search results

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. P

    Rebuilding a SAW Wavefigther

    I fitted the original servo mount but it didnt fit with the pushrod, so i changed to a tfl mount and added some carbon bracing. The damage to the bottom has been filled and is ready for sanding
  2. P

    Chucky GT ONE

    I was doing some filler work on the wavefigther and figured id give the GT one the same treatment. It sure looks like it was needed i added about 2mm of filler along rear edge. Now to get it sanded and the trailing edge sharp again
  3. P

    Really new here, looking to build my first boat, a 30 inch 3d printed monohull jet boat

    i have a few boats with the Mjet drives, go for a 40mm motor and less than 35000 unloaded rpm and a seaking 180 and you will be good to go
  4. P

    Rebuilding a SAW Wavefigther

    Thank you! she will be out again soon.
  5. P

    Rebuilding a SAW Wavefigther

    Got the hardware back on the boat, i ned to find a lot of wierd length m4 screws but thats not a problem. I was even able to reuse the original flexshaft. I like this layout with the batterys on the sides, gives lots of adjustability. I got my go to servo for this, its cheap, fast and strong
  6. P

    Rebuilding a SAW Wavefigther

    The motor questions was settled by my local hobbystore having a sale on castle 2028s so i now have both the 800kv and 1100kv to share between the fountain and the wavefigther. The low kv means i can share props between the two aswell. I used a leftover TFL 56mm motor mount and cut the rear...
  7. P

    Rebuilding a SAW Wavefigther

    I wanted to add a rib to reduce the flex in the hull. Step 1 foam with tape for the shape Step 2 Cover foam with UD 50mm carbon Step 3 45 degree carbon twill Step 4 wait It turned out great, i wish the twill was easier to push in the corners. but for a wet layup im happy with it
  8. P

    Rebuilding a SAW Wavefigther

    At this point its an ex saw boat, the fountain will be faster than this has ever been and take the beating. So this is more of a fun boat!
  9. P

    Rebuilding a SAW Wavefigther

    It will have to be the 4080 svm to get a resonable kv for 8s im hopeing to run a abc 1915-23-50. For a okay top speed and good pull out the turns
  10. P

    Rebuilding a SAW Wavefigther

    But if i go xlx2 what real options do i have?
  11. P

    Rebuilding a SAW Wavefigther

    Im having great luck with the max4 on 12s so im leaning that way
  12. P

    Rebuilding a SAW Wavefigther

    You are rigth about the price, a tp 5670 is a solid option. What kv is the real big question
  13. P

    Rebuilding a SAW Wavefigther

    I have the hardware to make it dual drive, but i also have a 47 inch Virus hull that is the next project. im thinking this gets a Big single on 12s2p Maybe a lehner, castle, TP, neu im open to idears.
  14. P

    Rebuilding a SAW Wavefigther

    I got some 200g biax layed down in the keel and some extra material over the flat arear before the strakes
  15. P

    Liberty's Fast Rigger build

    any updates on this?
  16. P

    Rebuilding a SAW Wavefigther

    Got a little work done yesturday, but accidentaly made this a lot bigger of a job.. I was cutting out the already mostly loose motor mounts and the loose part of the rails, and i went thru the hull.... :( Anyway with the mounts and rails out the hull is even flexier than before so im going to...
  17. P

    Rebuilding a SAW Wavefigther

    Its a great running hull a few people race them in the danish clubs, i think its a little too tall for my taste I got the crack prepped and did a wet layup of 2x 200g biax and 1x 135g carbon Going way oversize for this to make sure its not cracking there again Added a mixing stick to the edge...
  18. P

    Rebuilding a SAW Wavefigther

    since finishing my GT One i built a fountain 115 but now its time to build something new This is my latest Project, A PSR/MHZ Wavefigther, that according to the seller has been going fast at SAWs in both germany and the US in the late 2010s It came with most of the hardware to get it running...
  19. P

    Chucky GT ONE

    It is all back together, now to see if i cant get it over 80 mph
  20. P

    Chucky GT ONE

    New mounts are in, its a 2mm strip of carbon with brass inserts i printed a new and stronger batterytray and esc mounts aswell
Back
Top