Search results

Help Support intlwaters.com:

  1. steve wood

    K&B crankcase not square

    the rod and piston assembly will align itself with the crank in the horizonital direction. if the power takeoff end of the housing is milled parallel with the crank end it should work ok,"IF",the crank end is parallel with the liner bore. you will have to add a shim or gasket to the power...
  2. steve wood

    Boost/transfer relative to exhaust

    the higher you get with the blowdown, the less "friendly" your motor becomes. less torque coming off the corner,etc. if you squeeze the trigger,and never let go, it can work, but some people don't do that, and it may not work for them.
  3. steve wood

    Boost/transfer relative to exhaust

    check your pms
  4. steve wood

    Boost/transfer relative to exhaust

    exhaust timing(example:190°) .-transfer timing(example:130°)=60°/2=30°, which is the blow down for this particular engine. boost may or may not be the same. goolgle, 2 stroke blow down
  5. steve wood

    crank work

    spend your time on transfer and exhaust timing,crank timing, and head clearance and head volume.this is where the big gains are. then work on your props
  6. steve wood

    information needed

    i have a mr gasket 7 inch degree wheel i can sell you.
  7. steve wood

    End Mill Suggestions

    forgot to say 3 flute for aluminum
  8. steve wood

    End Mill Suggestions

    maritool.com , or msc accupro i only use carbide,more bang for the buck. will last forever at home for aluminum buy zirconimum coated (zrn), they are unbelievable, will run way faster than whatever machine you have is capable of, and aluminum won't stick to flutes and finish like you bought it...
  9. steve wood

    Nova care and rear cover

    Nova 21 case, and modified rear cover. $40 for both plus $8 shipping to usa
  10. steve wood

    Cmb 67 brass head

    Cmb 67 brass head $25 plus $8 shipping to usa
  11. steve wood

    NovaRossi Liner Dimensions

    i made the shims that mike z was selling
  12. steve wood

    For sale Mac carbs

    I need an address to ship to
  13. steve wood

    For sale Mac carbs

    Some people make the mistake of putting in an “e” where there isn’t one
  14. steve wood

    For sale Mac carbs

    boatracr@mchsi.com
  15. steve wood

    For sale Mac carbs

    Yes
  16. steve wood

    joe warren

    need a phone number for joe warren asap
  17. steve wood

    WANTED - Steve Woods rudder blade

    i have a 1 x 5.4 long blank that just needs the sides milled, and i have 2, 1.25 x6 long blanks that need the sides milled. i can get these done in a couple days
  18. steve wood

    For sale 21 head button

    pay pal to boatracr@mchsi.com
  19. steve wood

    For sale 21 head button

    custom head button for nova 21 long stroke. $25 plus $8 shipping
  20. steve wood

    For sale charger

    hyperion charger. Used very little. $50 plus shipping
Top