Search results

Help Support intlwaters.com:

  1. toadstoys5

    L/F a Sport .20

    Anyone got a nice Sport .20 Hydro, Seaducer 3.5 Mono or a little Cat setup for a CMB they want to part with? I've got a bunch of 3.5 engines I'm looking for a suitable home for.
  2. toadstoys5

    Any available good fuel available in the Orlando area or Pre-mixed available fuel from suppliers that ship.

    I need 2-4 gallons of good fuel that could be shipped to Ocala, FL or someone in a relatively close proximity so I could pick some up say around Orlando, Tampa, Ocala etc. anyone out there? I know Jerry sells it at Seaducer but that's a bit of a drive. I see "Torco" is on eBay don't know if its...
  3. toadstoys5

    Looking for Pit Box, Glo-Plug starter, fuel can etc.

    I'm trying to find a nice pit box that someone has for sale or could build that's made out of aircraft quality ply and is well thought out looks nice etc. Also need some tips on what you're using for the fuel container (glo-fuel), fuel pump etc. I've seen some guys with diamond plate aluminum...
  4. toadstoys5

    ISO parts for CMB 21's: Need flywheels, collets for several CMB 3.5's

    I've got several like new CMB 3.5's that I purchased a while back that need flywheels and cable collets. I was told two of the engines were reverse rotation and that I would need a drum rotor for direct drive CMB 21 RSV07 and one for CMB 21 VAC. Could someone chime in where to go and what I need...
  5. toadstoys5

    Looking for a Nice FE 1/8th Scale, Sport hydro or Mono

    I've never tried the FE stuff just looking for something I can play with that's nice and runs well. I would prefer an 1/8th Scale (there was an Exide on eBay I wish I would've pulled the trigger on) but regardless have decided I'm in search of. I would like a nice little Seaducer mono or Sport...
  6. toadstoys5

    JVS - Wanted: any vintage JVS hulls.

    I collect the old JVS hulls aka: Jeff and Vern Schmidt R/C boat hulls. These boats were built primarily back in the mid 70's to late 80's. They were built out of Hemet and Fountain Valley, CA at least when I was last aware. Vern always had a JVS ad in the RC Boat section of Flying Models...
  7. toadstoys5

    CMB Parts NEW & USED carbs, rear cases, mixture controls etc.

    I have many NEW and USED CMB engine parts for sale. I'm going to offer it up as a lot for one money or I will seperate. Any reasonable offers considered. Here's a "highlighted" list of what all is there to the best of my knowledge: - OS Max 4E carburetors (2) - CMB carburetors (5) all appear...
  8. toadstoys5

    CMB 90 EVO PARTS-Engine/Carbs/Cases/Cranks etc.

    CMB 90 EVO etc. USED Parts lot for sale, Buy it All or by piece. Selling off my USED CMB 90 parts lot which includes cases, carburetors, pistons, liners, water-cooled head jackets, rear covers, front covers, cranks/rods, disc valves. NOTE: The pistons are NOT matched to the sleeves so no...
  9. toadstoys5

    CMB 90 Evo II

    CMB 90 EVO II for sale This was a engine I've kept around for a project that I'm not going to finish so I'll offer it up. It turns over freely and was stored in a plastic ziplock bag in marvel mystery oil. Had some surface corrosion on the head bolts which stained the case, engine otherwise...
  10. toadstoys5

    Villain S1 Tunnel Hull RTR w/K&B OB all servos

    Villain S1 Tunnel Hull RTR w/ fresh K&B OB all servos, stainless tank, billet servo horn everything is like new, photos speak for themselves no time to play anymore, lost interest $275 shipped Cont US paypal, check or money order thanks, Tom ph: 816-536-3703, e-mail: tom4kc@gmail.com
  11. toadstoys5

    Anheuser Busch Natural Light U-13 1/8th scale

    For Sale: Anheuser Busch Natural Light U-13 1/8th scale “piston” hull. This hull is all fiberglass, complete with CMB .67, pipe, hardware and all servos etc. Comes with the following Correct paint scheme scale graphics CMB 67 greenhead MAC pipe servos waterproof radio box Complete hardware...
  12. toadstoys5

    Miss Madison U-6 1/8th scale turbine hull

    For Sale: Miss Madison U-6 1/8th scale turbine hull. This hull is all fiberglass, complete with CMB .67, pipe, hardware and all servos etc. The boat has been sitting on my shelf with Correct paint scheme with scale graphics CMB 67 greenhead MAC pipe servos Fiberglass radio box Complete...
  13. toadstoys5

    JVS Nostalgia Hulls wanted to purchase

    I'm looking for any nice old JVS hulls if anyone has anything they want to sell. I'd prefer the metalflake gel-coat versions over plain white. JVS was out of Fountain Valley and later; Hemet, CA and built some really neat all glass monos, sport hydros and the famous claimjumper in the late 70's...
  14. toadstoys5

    7 Stainless fuel tanks

    I have (7) different stainless tanks for sale of various sizes as marked. Length X Width X Height at tallest measurement 6 1/8 x 4 3/4 x 2 5 3/4 x 4 11/16 x 2 5 1/2 x 4 3/4 x 1 1/2 6 5/8 x 4 7/8 x 2 5 3/4 x 5 x 2 5 1/2 x 4 1/2 x 1 3/4 5 x 4 1/4 x 1 5/8 They need to be cleaned up a bit...
  15. toadstoys5

    CMB Big Block Engine

    Just getting rid of some really nice spare engines that I've had oiled and sealed for some time. These engines have always been kept in a climate controlled environment and are all nice with excellent compression, pistons, sleeves etc. I will list each one seperately and ask that you guys...
  16. toadstoys5

    CMB Big Block engine

    Just getting rid of some really nice spare engines that I've had oiled and sealed for some time. These engines have always been kept in a climate controlled environment and are all nice with excellent compression, pistons, sleeves etc. I will list each one seperately and ask that you guys...
  17. toadstoys5

    CMB Big Block engine

    Just getting rid of some really nice spare engines that I've had oiled and sealed for some time. These engines have always been kept in a climate controlled environment and are all nice with excellent compression, pistons, sleeves etc. I will list each one seperately and ask that you guys...
  18. toadstoys5

    CMB 67 Greenhead

    Just getting rid of some really nice spare engines that i've had oiled and sealed for some time. These engines have always been kept in a climate controlled environment and are all nice with excellent compression, pistons, sleeves etc. NOTE: This one has the very desireable OS carburetor so I...
  19. toadstoys5

    CMB .67 Greenhead

    Just getting rid of some really nice spare engines that i've had oiled and sealed for some time. These engines have always been kept in a climate controlled environment and are all nice with excellent compression, pistons, sleeves etc. I will list each one seperately and ask that you guys...
  20. toadstoys5

    CMB .80 Greenhead

    Just getting rid of some really nice spare engines that i've had oiled and sealed for some time. These engines have always been kept in a climate controlled environment and are all nice with excellent compression, pistons, sleeves etc. I will list each one seperately and ask that you guys...
Top