Who's got the nice Modified Zenoahs?

Rene Garcia · Apr 13, 2023

Looking to repower an Aeromarine Sprint Cat with a modified 30 cc Gas Zenoah, Which company do you guys recommend out there?
Thanks in Advance

FloridaScaleBoater · Apr 13, 2023

Rene Garcia said:
Looking to repower an Aeromarine Sprint Cat with a modified 30 cc Gas Zenoah, Which company do you guys recommend out there?
Thanks in Advance

Lamar Huff, Huff racing.
From Atlanta

DeanJohnson · Apr 13, 2023

Roger Pane = RPMotorsports

Costly, but worth it.

Lay26 · Apr 13, 2023

Bh hanson AL does really good work..

David Ashcroft · Apr 14, 2023

OMEN Australia.

BullDogRacing · Apr 14, 2023

100% you cant over look OMEN Zenoahs ,
Look up OMEN race engines on face book, with the Aus dollar low against the strong US dollar, you want find a better deal on a race proven weapon.

GRAHAME HAINES · Apr 14, 2023

I run an Omen 23 in my backlash here in New Zealand and it more than has the measure of any other 27 than anyone runs out here.

Daniel's Racing · Apr 14, 2023

I build a awesome 29.5cc.

Priced right and always come with the best main bearings already installed and crank end play set close to .005" in them so you don't have a failed bearing retainer taking out your engine way too soon.

Put a lot of time in everyone to make sure it is going to make the power it is supposed to.

Bryan haley · Apr 14, 2023

B.h Hanson in my opinion Al is awesome got his 310 pro mod in my seaducer and it is blazing fast and starts up withing 3 pulls every time

Mark Anderson · Apr 14, 2023

Build your own. All of the info is out there. Nothing magical. Need help, just ask.

Daniel's Racing · Apr 14, 2023

Mark Anderson said:
Build your own. All of the info is out there. Nothing magical. Need help, just ask.

One way to learn and save money on engines as well as satisfaction of running what you built.

I have engine stands, degree wheels, porting plugs and digital squish gauges for sale if interested to ensure your first attempt at porting is successful.
I have last set of single cut 1/8" carbide bits. They cut very smoothly then you use mini 1/8" flap sandpaper strip arbors that make your port work look good when your done with the cutting.

The only problem is cutting squish band and combustion chamber if you don't have a lathe and/or mill to do that. Can't always set squish exactly where you want with just gaskets so you may need to be setup to cut the cylinder base as well.

The stock bearings are known to fail early on a little too often so best to get something better for main bearings.

Stevegross · Apr 14, 2023

Daniel's Racing said:
One way to learn and save money on engines as well as satisfaction of running what you built.

I have engine stands, degree wheels, porting plugs and digital squish gauges for sale if interested to ensure your first attempt at porting is successful.
I have last set of single cut 1/8" carbide bits. They cut very smoothly then you use mini 1/8" flap sandpaper strip arbors that make your port work look good when your done with the cutting.

The only problem is cutting squish band and combustion chamber if you don't have a lathe and/or mill to do that. Can't always set squish exactly where you want with just gaskets so you may need to be setup to cut the cylinder base as well.

The stock bearings are known to fail early on a little too often so best to get something better for main bearings.

Do you have a list of everything you sell somewhere?

John Forbes · Apr 15, 2023

Daniel's Racing said:
One way to learn and save money on engines as well as satisfaction of running what you built.

I have engine stands, degree wheels, porting plugs and digital squish gauges for sale if interested to ensure your first attempt at porting is successful.
I have last set of single cut 1/8" carbide bits. They cut very smoothly then you use mini 1/8" flap sandpaper strip arbors that make your port work look good when your done with the cutting.

The only problem is cutting squish band and combustion chamber if you don't have a lathe and/or mill to do that. Can't always set squish exactly where you want with just gaskets so you may need to be setup to cut the cylinder base as well.

The stock bearings are known to fail early on a little too often so best to get something better for main bearings.

Email address and pricing for you mod engines plz and ty

Daniel's Racing · Apr 16, 2023

Stevegross said:
Do you have a list of everything you sell somewhere?

Steve,
I do not have a list. I am sorry. You can find a lot of things I make scrolling back through the manufacturers for sale section.

John Forbes said:
Email address and pricing for you mod engines plz and ty

John,

The fully modded G300PUM 29.5cc is $585 shipped.

Email and Paypal is [email protected]

Thank you,
Daniel

John Forbes · Apr 16, 2023

Daniel's Racing said:
Steve,
I do not have a list. I am sorry. You can find a lot of things I make scrolling back through the manufacturers for sale section.

John,

The fully modded G300PUM 29.5cc is $585 shipped.

Email and Paypal is [email protected]

Thank you,
Daniel

Hi do you balance the crank shaft ? Ty

Daniel's Racing · Apr 16, 2023

John,
No sir.
No engine builders are balancing the crankshafts in these gas engines that I know of.

I do true the flywheel to the crank taper on every surface.

jethead2 · Apr 27, 2023

what about sending you a new stock 30 what are we looking at? Going in a scale boat Thanks

happybradboating · Apr 27, 2023

The 29.5 Suicidal motor I purchased a few years back ran real nice in my Y6!

Daniel's Racing · Apr 27, 2023

jethead2 said:
what about sending you a new stock 30 what are we looking at? Going in a scale boat Thanks

$365 including the high quality main bearings and the shipping.

LohringMiller · Apr 28, 2023

For DIY racers I've written three articles on Zenoah mods.

Lohring Miller

Who's got the nice Modified Zenoahs?

Help Support Intlwaters:

Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Attachments

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!