Radio setup for 3rd channel

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jeffaustin

Well-Known Member
Joined
May 21, 2011
Messages
391
Have a Futaba 4PK-2:4G Super -R transmitter,
Want to use the DT3 control for 3rd channel,I have manual but can’t figure this out…. Thanks for any help
 
Go to switches and dials and assign DT3 to channel 3

The 4PK has dials by themselves. Dial>DT3 set to Ch3 set your step amount and then forward or reverse.

You can also change the number of clicks available or the amount of motion you get from each click. Also forward and reverse direction of the channel is set in there also.

Page 87 and 88

https://www.manualslib.com/manual/378273/Futaba-4pk-2-4ghz.html?page=87#manual
 
Last edited:
Awesome radio. It is what I use. Own 3. Only use one. The other 2 are back ups.
 
Last edited:
Back
Top