Winter project

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Looks very well done. The Whips are great boats! They're easy to dial in, very fast and always run smooth! Dang it. Now I'm missing mine that I sold! šŸ¤” I did the same set up using a Quickdraw pipe with a 1/2" offset and it cleared the cowl/locks nicely.
 
Last edited:
Wet sanded the cowl had too much dust in clear mixed up the clear and did the hull 3 lids and cowl turned out better was trying to reassemble the boat today but had to watch the Super Bowl should have it together tomorrow
 

Attachments

  • C87E8F87-8710-42A5-98C7-043980CB310B.jpeg
    C87E8F87-8710-42A5-98C7-043980CB310B.jpeg
    1.9 MB · Views: 0
Mounted all the hardware put the B H Hansen hornet engine in it used 3/16 tig rod for rudder linkage and 6/32 ball links woods rc seals I like straight no bend linkage the carb arm stripped I had so used the stock link arm the carb came with still need to cut the drive shaft and hook the receiver up fuel tank and hoses for water cooling done too I need to glue floatation in the cowl next
 

Attachments

  • 7AACE627-155C-416F-942E-715993763994.jpeg
    7AACE627-155C-416F-942E-715993763994.jpeg
    1.8 MB · Views: 1
  • 95F5261C-445B-4F41-BF44-EA3AD01B8782.jpeg
    95F5261C-445B-4F41-BF44-EA3AD01B8782.jpeg
    1.7 MB · Views: 0
  • EB720A19-2459-42D4-9DB6-46060C5B8C47.jpeg
    EB720A19-2459-42D4-9DB6-46060C5B8C47.jpeg
    1.7 MB · Views: 0
  • 22F7B9BC-2E26-4E71-99F7-5C227FA81215.jpeg
    22F7B9BC-2E26-4E71-99F7-5C227FA81215.jpeg
    2 MB · Views: 1
  • 450426B2-A1BA-40F3-BAD3-930256F6245D.jpeg
    450426B2-A1BA-40F3-BAD3-930256F6245D.jpeg
    2 MB · Views: 0
Finally receiced the windshield decal from rc boat decals also put a blazer turn on it
 

Attachments

  • 5FF1DC9F-165B-48DD-9229-B43FDBA688AA.jpeg
    5FF1DC9F-165B-48DD-9229-B43FDBA688AA.jpeg
    1.6 MB · Views: 0
  • 384B18B7-16CA-4426-99E0-ABD0588B601B.jpeg
    384B18B7-16CA-4426-99E0-ABD0588B601B.jpeg
    1.7 MB · Views: 0
Nice I havenā€™t built a slingshot yet on my list later this year have any pictures?
Yeah hereā€™s a few. Iā€™ve been referring to Mario Johnstonā€™s build thread in the Outrigger Forum. Itā€™s back on page 4 currently. Also, thereā€™s no manual online but one does exist. Ask Bob to email you a pdf.
6F20EC60-D0EB-459C-989B-D7C8FBEF9628.jpegB2F86D63-EE09-4E8B-AC60-C2B56FED3ABD.jpeg52819EC4-0F38-45BF-B4D1-4F2B670FE427.jpeg6986C458-600E-40DC-8FEC-19B1820C5B29.jpegAE2E8093-348B-4284-BD8D-B0505EF9FE3E.jpeg097135ED-862A-46D3-901A-2EC02D9438D4.jpegB4BD814B-DC94-4A32-842B-1C8453E6F815.jpeg41BE0C72-A329-4175-A20F-95616DC55650.jpeg2A8BC8CE-AA0C-42D5-A16C-DFE269E5ABE3.jpegB9096A2D-D80C-4F2D-BE1B-E2DB64F1E70B.jpeg
 
Very nice I love the gp200 in the first picture I always wanted to do one in that theme just never got to it
 
Very nice I love the gp200 in the first picture I always wanted to do one in that theme just never got to it
I bought that and another off of Troy and TJ Hammonds. The GP 200 is, I believe, one of the two original Lauterbach hulls produced by Blazer Marine. Youā€™ll notice that the non trip area is different than what is produced now. My last pic has the other Lauterbach hull I got from them that I have rigged and ready to run. Paint will come later. You can easily see how the non trip was changed.
 
Thanks that wasnā€™t the original plan, just how it turned out. I had to build a new boat rack that I can roll around in order to make it work space wise. From here Iā€™m gonna try to hold it down to what I can store on two 5 boat racks.
 
Back
Top