ML Dumas build

Hydro Junkie · Dec 28, 2022

larcor69 said:
On to get the rear portion of the cowl made it's a #@#@&$# trying to get it right lol

If you think that Atlas cowl is hard, try doing the 1973 Pak from plans. I spent the better part of three hours just trying to get the angles and dimensions all correctly measured. Believe me, it was a B**ch since the angles are, more often than not, compounds.

larcor69 · Jan 20, 2023

Plugging along, a lot more detailing on the cowling to do

Rich Jones · Jan 21, 2023

larcor69 said:
Plugging along, a lot more detailing on the cowling to do

That is looking really good so far man!

larcor69 · Feb 6, 2023

Mike Hughes said:
While you have the deck still open, I would suggest you support both ends of the dowel that run into both sponson. This will help with twisting of the pickle forks. A frame that runs from the bulkhead in front and behind would add a ton of strength to the boat. Easy to do now.
Mike

I added a 1/4" piece of pie about an inch and a quarter wide from frame to frame going to do a little more sanding and put some pool noodles in there and put the top skin on the right side tomorrow

Jeff Barnes · Feb 7, 2023

Stay after it Corey looking forward to seeing it run Jeff

Wasted wages · Feb 9, 2023

Some ply doublers in the nose of the center tub wouldn't hurt either, where the tubes pass thru.... looks a little thin there.

larcor69 · Feb 9, 2023

Wasted wages said:
Some ply doublers in the nose of the center tub wouldn't hurt either, where the tubes pass thru.... looks a little thin there.

Yes, I plan on that also

larcor69 · Feb 11, 2023

Getting her skins on

larcor69 · Feb 19, 2023

I got the air traps built onto the canard wings are built I just need to put them on

larcor69 · Mar 8, 2023

Just about ready to seal it up and start getting ready for paint

ML Dumas build

Help Support Intlwaters:

Hydro Junkie

Well-Known Member

larcor69

Well-Known Member

Attachments

Rich Jones

Well-Known Member

larcor69

Well-Known Member

Attachments

Jeff Barnes

Well-Known Member

Wasted wages

Well-Known Member

larcor69

Well-Known Member

larcor69

Well-Known Member

Attachments

larcor69

Well-Known Member

Attachments

larcor69

Well-Known Member

Attachments

Similar threads

Latest posts

ML Dumas build

Help Support Intlwaters:

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Attachments

Well-Known Member

Attachments

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!