Krylon color maxx spray paints !

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Andris...im a Krylon guy...and as of late been using the colormaxx line..the only issues I'm having with any spray paint these days is spray your color as many coats as needed in one session if not it will wrinkle.....give it several days to cure...then mask for any other colors...i sand with 600-800 between colors...dont spray your next color just because it feels dry.....it will wrinkle.... after your color is done I spray over with Spraymax 2k gloss clear..seals everything up nice...
Robert, I'm finishing up my SLR Thunderboat build, epoxy and prep for paiting, my 1st build so I've been reading about painting, found different threads, comments about the type of paint.........I'm glad I found your comment about the Krylon Colormax, planning to do the same, using Krylon Colormax for primer and color then Sprymax 2K clear, the questions how was your experience with Krylon Colormax ? they are not acrylic paint, any issues with the gas boat ? as far as the cowl, do I need to use primer or only sand and apply color on it ?
 

Attachments

  • Crylon Colormaxx.jpg
    Crylon Colormaxx.jpg
    67.5 KB · Views: 0
  • My Build 21.jpg
    My Build 21.jpg
    63.6 KB · Views: 0
  • My Build 22.jpg
    My Build 22.jpg
    71.8 KB · Views: 0
Hey guys....here is a total Krylon job....
Gloss white, Jungle green, Gloss black and Krylon silver blast over the white...i also have 1/8"black and red vinyl for the windoes and some trim..i will clearcoat it with PPG shopline gloss clear
Is this fusion line or colormaxx from krylon
 
Back
Top