- Joined
- Mar 7, 2011
- Messages
- 1,239
Carb question
- Thread starter jim kapanowski
- Start date
Help Support Intlwaters:
Danny King
Well-Known Member
- Joined
- Nov 26, 2012
- Messages
- 2,279
They are one piece with the front plate
- Joined
- Mar 7, 2011
- Messages
- 1,239
**** that’s what I was afraid of
- Joined
- Jan 2, 2006
- Messages
- 2,760
Mill the body of the carb off,, make an adapter that bolts to the front plate and has an opening for a standard o-ring mount carb and then you have 360 degrees of mounting
options...
options...
Danny King
Well-Known Member
- Joined
- Nov 26, 2012
- Messages
- 2,279
Just run those carbs. Lose the low end stuff. You could ask mark Bullard to make barrels. He has done some good stuff and may be interested.
But I’d run that carb. Most guys over carb anyways.
But I’d run that carb. Most guys over carb anyways.
ALLAN YUEN
Well-Known Member
- Joined
- Jan 14, 2005
- Messages
- 6,427
be careful to easy tear gasket backplate Good Luck!
- Joined
- Mar 7, 2011
- Messages
- 1,239
That’s way to much of a headace
I will have to redesign or use two different engines
- Joined
- Mar 7, 2011
- Messages
- 1,239
Ya rag that’s the pla. Just have to make a different throttle set up for one engine
